Phenolic Resin Hardener
The standard curing agent for novolac resins in moulding compounds, foundry sand and brake linings.
Olefins, aromatics, refinery streams, polymers, rubbers, solvents, plasticizers, acids, reagents & inorganics for GCC and global buyers.
Excipients, vitamins and API intermediates for formulation and synthesis.
Aniline, fluoro and specialty building blocks for herbicide, fungicide and insecticide technicals.
Diazo components, nitroanilines, nitrobenzenes and chloro/fluoro aromatics for azo dyes, lake pigments and inks.
Anilines, toluidines, anisidines, phenylenediamines, aliphatic, cyclic, fatty and ethylene amines plus alkanolamines.
No exact match — we source specialty chemicals on request.
Ask for this productCan’t find your chemical? Sourced on request with COA & SDS, delivered across all 7 Emirates & the GCC.
Chelora Chemicals UAE supplies Hexamethylenetetramine (CAS 100-97-0) as powder and granules to phenolic-resin, foundry, rubber, adhesive and pharmaceutical manufacturers across Dubai, Abu Dhabi, Sharjah and all seven Emirates, against documented end use, with batch-wise COA, sealed packing and fast GCC delivery.
Hexamethylenetetramine (HMTA, hexamine, methenamine, urotropine) is a cage-shaped heterocyclic compound made from formaldehyde and ammonia, a white, odourless crystalline powder or granule. It dissolves freely in water, and on heating or in acid it slowly releases formaldehyde and ammonia.
It is used mainly as a curing agent for novolac phenolic resins in moulding compounds, foundry binders, brake linings and abrasives, in rubber vulcanisation systems, as methenamine in urinary antiseptics, in adhesives and coatings, as a corrosion inhibitor in acid pickling, in textile finishing and in solid fuel tablets.
As an established chemical supplier in the UAE, Chelora Chemicals sources Hexamethylenetetramine from approved manufacturers with consistent assay and low levels of moisture, free ammonia and insolubles, and delivers it to customers in Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, as well as export customers in Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, Africa and South Asia.
Typical specification and physical data for Hexamethylenetetramine supplied in the UAE. Limits depend on the grade, and batch-specific values are always confirmed on the Certificate of Analysis.
| Parameter | Specification |
|---|---|
| Appearance | White crystalline powder or granules |
| Assay | Not less than 99.0% (typical) |
| Free ammonia & insolubles | As per COA / customer requirement |
| Water (Karl Fischer) | Not more than 0.5% (typical) |
| Density (20 °C) | Approx. 1.33 g/cm³ |
| Boiling point | Sublimes at about 260 °C (decomposes) |
| Grade | Technical / synthesis grade, as per COA |
| Packing & documents | Drums, IBCs, ISO tanks; COA, SDS, TDS, COO |
| Property | Value |
|---|---|
| Chemical name | 1,3,5,7-Tetraazaadamantane |
| CAS number | 100-97-0 |
| Molecular formula | C₆H₁₂N₄ |
| Molecular weight | 140.19 g/mol |
| Physical state (20 °C) | Crystalline solid |
| Melting / boiling point | Sublimes; decomposes above about 270 °C / Sublimes at about 260 °C (decomposes) |
| Solubility | Freely soluble in water (about 85 g/100 mL at 20 °C); soluble in ethanol |
| Sensitivity | Hygroscopic; releases formaldehyde and ammonia in acid or with heat; flammable solid; keep dry and away from acids |
Values are typical literature data for reference only and do not form a sales specification. Contact us for the latest TDS and batch COA.
Need a specific particle size, assay or pharma-grade documents? We match your spec to approved makers.
Share Your Specification →From phenolic resin hardening to methenamine tablets, HMTA is a versatile cage amine for manufacturers in the UAE and GCC.
The standard curing agent for novolac resins in moulding compounds, foundry sand and brake linings.
Used as an activator and in adhesion systems for rubber-to-cord bonding.
The active in methenamine hippurate and mandelate urinary antiseptics.
A crosslinker in resorcinol and phenolic adhesive systems.
Reduces metal attack in acid pickling and descaling.
Used in selected crease-resist and finishing formulations.
Our UAE customers for Hexamethylenetetramine are industrial manufacturers and licensed distributors, supplied against documented end use.
Novolac curing.
Binders and linings.
Vulcanisation and bonding systems.
Methenamine products.
Verified Dubai and Sharjah traders re-exporting within the rules of each destination.
Synthesis labs needing small lots with full documentation.
Campaign-based production for global brands.
Verified importers in the GCC, Africa and South Asia, subject to import rules.
We supply Hexamethylenetetramine to industrial areas, ports and free zones throughout the UAE, with re-export to the wider GCC and beyond.
Fast local delivery to phenolic-resin, foundry, rubber, pharmaceutical and adhesive manufacturers in Dubai, plus re-export via Jebel Ali Port.
Supply to phenolic-resin, foundry, rubber, pharmaceutical and adhesive manufacturers in Musaffah, KEZAD and around Khalifa Port.
Serving phenolic-resin, foundry, rubber, pharmaceutical and adhesive manufacturers across Sharjah's industrial areas and free zones.
Reliable deliveries for Ajman-based phenolic-resin, foundry, rubber, pharmaceutical and adhesive manufacturers from our UAE stock and import programme.
Supplying phenolic-resin, foundry, rubber, pharmaceutical and adhesive manufacturers in RAK's free zones and ports.
Road delivery to the east coast with access to Port of Fujairah for regional shipments.
Consolidated with our northern Emirates deliveries for factories and traders.
Export from the UAE on EXW, FOB, CFR, CIF, DAP or DDP terms.
HMTA absorbs moisture and decomposes in acid and heat, so we ship it in sealed, lined bags or fibre drums that keep it dry and free-flowing through UAE summer heat and humidity.
Whether you need a few drums for a pilot batch or regular bulk loads for continuous production, we plan packing, labelling, documentation and transport from port or warehouse to your gate.
25 kg moisture-protected fibre drums.
25 kg and jumbo bags for regular production.
Stretch-wrapped pallets for regular supply.
EXW UAE, FOB Jebel Ali / Khalifa, CFR, CIF, DAP, DDP.
A simple, transparent procurement process built for busy purchase teams.
Send product name, CAS 100-97-0, grade (technical or pharma), particle size and packing, quantity, packing and delivery Emirate.
We match approved makers and send a quotation with packing, Incoterm and lead time.
COA, SDS and TDS shared upfront, with Hexamethylenetetramine samples available for qualification.
We lock in the batch, arrange sealed packing and GHS labelling.
Customs clearance, documentation and transport and transport from port or warehouse.
Delivery to your site in the UAE or GCC, plus repeat-order planning.
Every lot of Hexamethylenetetramine we supply is traceable to its manufacturer and production date. We check assay, moisture, free ammonia and insolubles against your requirement before dispatch. Supply is subject to end-use confirmation and the documentation required by UAE and destination-country rules.
Hazardous. Hexamethylenetetramine is classified as a flammable solid, may cause allergic skin reactions and can release formaldehyde on decomposition. It is not highly toxic by ingestion. Some countries monitor it under chemical-control rules. Always refer to the supplied SDS for the full classification and transport details.
Moisture-protected packing keeps powder and granules flowing through UAE summer conditions.
One supplier for the grade each of your product lines needs.
Clear quotes with grade, packing, Incoterm and lead time so your purchase team can decide quickly.
COA, SDS, TDS, COO and DG paperwork ready for audits, customs and GCC export.
Delivery of Hexamethylenetetramine across the seven Emirates and export to Saudi Arabia, Oman, Qatar, Kuwait and Bahrain.
From sample and trial lots to annual supply contracts and bulk programmes.
Common questions from UAE and GCC buyers about Hexamethylenetetramine supply, specifications and delivery.
HMTA is used as a curing agent for novolac phenolic resins, in rubber vulcanisation systems, as methenamine in urinary antiseptics, in adhesives and coatings, as a pickling corrosion inhibitor, in textile finishing and in solid fuel tablets.
The CAS number of Hexamethylenetetramine is 100-97-0. Its molecular formula is C₆H₁₂N₄ and its molecular weight is 140.19 g/mol.
Hexamethylenetetramine (CAS 100-97-0) is also sold as HMTA, hexamine, methenamine, urotropine, hexamethylene tetramine, 1,3,5,7-tetraazaadamantane. Please mention the CAS number in your enquiry so we quote the right material.
Chelora Chemicals UAE is a B2B chemical supplier and distributor of Hexamethylenetetramine, serving Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with full COA, SDS and TDS documentation and export to the wider GCC.
Yes. We deliver to all seven Emirates, including Jebel Ali and JAFZA in Dubai, KEZAD, Musaffah and Khalifa Port in Abu Dhabi, and SAIF Zone and Hamriyah Free Zone in Sharjah, as well as RAKEZ, Ajman Free Zone and Fujairah.
We supply HMTA as technical-grade and pharma-grade powder and granules with an assay of 99% or higher, as per COA. Please state the grade, particle size and your intended end use.
HMTA (CAS 100-97-0) is the cage compound made from formaldehyde and ammonia. It is different from hexamethylenediamine (CAS 124-09-4), from hexylamine (CAS 111-26-2), from urea-formaldehyde resins and from methenamine salts such as hippurate and mandelate. Please quote the CAS number.
Share the grade (technical or pharma), particle size and packing, quantity, packing, Incoterm and delivery Emirate through our contact page and our team aims to respond within one business day.
Typically 25 kg lined, moisture-protected bags or fibre drums, with jumbo bags for large users. Packs are sealed against moisture and labelled for safe transport.
The minimum order depends on packing and current stock. We handle everything from a few drums or small packs for trials and lab qualification up to full container loads.
Store in tightly closed, lined bags or drums in a cool, dry, well-ventilated area away from acids, oxidisers and ignition sources. Reseal opened packs promptly.
HMTA is a flammable solid and can cause allergic skin reactions, and it releases formaldehyde when it decomposes in acid or with heat. Avoid dust, ignition sources and acids, use gloves and eye protection, and follow the SDS supplied with the product.
Yes. We export from the UAE to Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, East and West Africa, South Asia and other markets on EXW, FOB, CFR, CIF, DAP or DDP terms, subject to the import rules of each destination.
Yes. Samples are available for qualification on request, together with the COA and SDS, so your QC or R&D team can approve the material before a commercial order.
On heating, HMTA decomposes to release formaldehyde and ammonia, which form methylene and dimethylene-amine bridges between the novolac chains. This turns the thermoplastic resin into a rigid, crosslinked thermoset in moulding compounds, foundry sand binders and friction materials.
In some countries HMTA is monitored under chemical-control or security rules, and supply can need end-user declarations or permits. We supply only against documented industrial or pharmaceutical end use and in line with UAE and destination-country rules, so please share your company and application details with the enquiry.
Tell us your grade (technical or pharma), particle size and packing, quantity, packing and delivery Emirate, and get a quote for Hexamethylenetetramine from a trusted chemical supplier in the UAE.