Nylon 6,6 & Nylon 6,10
Reacted with adipic or sebacic acid to make nylon salts and polymers.
Olefins, aromatics, refinery streams, polymers, rubbers, solvents, plasticizers, acids, reagents & inorganics for GCC and global buyers.
Excipients, vitamins and API intermediates for formulation and synthesis.
Aniline, fluoro and specialty building blocks for herbicide, fungicide and insecticide technicals.
Diazo components, nitroanilines, nitrobenzenes and chloro/fluoro aromatics for azo dyes, lake pigments and inks.
Anilines, toluidines, anisidines, phenylenediamines, aliphatic, cyclic, fatty and ethylene amines plus alkanolamines.
No exact match — we source specialty chemicals on request.
Ask for this productCan’t find your chemical? Sourced on request with COA & SDS, delivered across all 7 Emirates & the GCC.
Chelora Chemicals UAE supplies Hexamethylenediamine (HMDA) (CAS 124-09-4) as solid or melt and as a 70% aqueous solution to nylon, polyurethane, epoxy-hardener, polyamide-resin and specialty-chemical manufacturers across Dubai, Abu Dhabi, Sharjah and all seven Emirates, with batch-wise COA, sealed packing and fast GCC delivery.
Hexamethylenediamine (HMDA, 1,6-hexanediamine) is a linear aliphatic diamine, a white to colourless waxy solid that melts at about 39–42 °C, with a strong ammonia-like odour. It is supplied as a solid, as a hot melt or as a 70% aqueous solution, and it dissolves freely in water.
Its largest use is the nylon 6,6 salt with adipic acid, followed by nylon 6,10 and 6,12, hexamethylene diisocyanate (HDI) for light-stable polyurethanes, epoxy curing agents, polyamide and polyurea resins, corrosion inhibitors and textile and adhesive chemicals.
As an established chemical supplier in the UAE, Chelora Chemicals sources Hexamethylenediamine (HMDA) from approved manufacturers with consistent assay and low levels of aminocapronitrile, cyclic by-products and water, and delivers it to customers in Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, as well as export customers in Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, Africa and South Asia.
Typical specification and physical data for Hexamethylenediamine (HMDA) supplied in the UAE. Limits depend on the grade, and batch-specific values are always confirmed on the Certificate of Analysis.
| Parameter | Specification |
|---|---|
| Appearance | White to colourless waxy solid (melts near 40 °C); clear liquid when melted or in solution |
| Assay | Not less than 99.0% (solid grade); 70% w/w (solution grade) |
| Cyclic & nitrile by-products | As per COA / customer requirement |
| Water (Karl Fischer) | Not more than 0.5% (solid grade) |
| Density (20 °C) | Approx. 0.85 g/mL (melt) |
| Boiling point | Approx. 204 – 205 °C |
| Grade | Technical / synthesis grade, as per COA |
| Packing & documents | Drums, IBCs, ISO tanks; COA, SDS, TDS, COO |
| Property | Value |
|---|---|
| Chemical name | Hexane-1,6-diamine |
| CAS number | 124-09-4 |
| Molecular formula | H₂N(CH₂)₆NH₂ |
| Molecular weight | 116.21 g/mol |
| Physical state (20 °C) | Waxy solid, melt or aqueous solution |
| Melting / boiling point | 39 – 42 °C / Approx. 204 – 205 °C |
| Solubility | Freely soluble in water and ethanol |
| Sensitivity | Hygroscopic; absorbs CO₂; corrosive; solidifies below about 40 °C; keep sealed and hot-melt handled with care |
Values are typical literature data for reference only and do not form a sales specification. Contact us for the latest TDS and batch COA.
Need a specific form, colour (APHA) or purity for nylon salt or HDI production? We match your spec to approved makers.
Share Your Specification →From nylon 6,6 to light-stable polyurethanes, HMDA is a high-volume diamine for polymer manufacturers in the UAE and GCC.
Reacted with adipic or sebacic acid to make nylon salts and polymers.
The raw material for hexamethylene diisocyanate used in coatings and foams.
A flexible diamine for hardeners and adducts.
Used in resins, adhesives and hot-melts.
A building block for amine-based inhibitors.
A linker and building block in specialty synthesis.
Our UAE customers for Hexamethylenediamine (HMDA) are industrial manufacturers and licensed distributors, supplied against documented end use.
Polyamide salts and polymers.
HDI-based systems.
Hardeners and polyamide resins.
Fibres, coatings and hot-melts.
Verified Dubai and Sharjah traders re-exporting within the rules of each destination.
Synthesis labs needing small lots with full documentation.
Campaign-based production for global brands.
Verified importers in the GCC, Africa and South Asia, subject to import rules.
We supply Hexamethylenediamine (HMDA) to industrial areas, ports and free zones throughout the UAE, with re-export to the wider GCC and beyond.
Fast local delivery to nylon, polyurethane, epoxy-hardener, polyamide-resin and specialty-chemical manufacturers in Dubai, plus re-export via Jebel Ali Port.
Supply to nylon, polyurethane, epoxy-hardener, polyamide-resin and specialty-chemical manufacturers in Musaffah, KEZAD and around Khalifa Port.
Serving nylon, polyurethane, epoxy-hardener, polyamide-resin and specialty-chemical manufacturers across Sharjah's industrial areas and free zones.
Reliable deliveries for Ajman-based nylon, polyurethane, epoxy-hardener, polyamide-resin and specialty-chemical manufacturers from our UAE stock and import programme.
Supplying nylon, polyurethane, epoxy-hardener, polyamide-resin and specialty-chemical manufacturers in RAK's free zones and ports.
Road delivery to the east coast with access to Port of Fujairah for regional shipments.
Consolidated with our northern Emirates deliveries for factories and traders.
Export from the UAE on EXW, FOB, CFR, CIF, DAP or DDP terms.
HMDA melts near 40 °C and absorbs carbon dioxide and moisture, so we ship it as sealed flakes, drums or heated bulk melt and as a 70% solution in sealed containers, planned so it stays clean and can be handled hot where needed.
Whether you need a few drums for a pilot batch or regular bulk loads for continuous production, we plan packing, labelling, documentation and transport from port or warehouse to your gate.
Sealed HDPE or lined steel drums, typically 200–250 kg.
Bulk containers for regular large-volume supply.
Sealed trial quantities for formulation work.
EXW UAE, FOB Jebel Ali / Khalifa, CFR, CIF, DAP, DDP.
A simple, transparent procurement process built for busy purchase teams.
Send product name, CAS 124-09-4, form (solid, melt or 70% solution), colour limit and packing, quantity, packing and delivery Emirate.
We match approved makers and send a quotation with packing, Incoterm and lead time.
COA, SDS and TDS shared upfront, with Hexamethylenediamine (HMDA) samples available for qualification.
We lock in the batch, arrange sealed packing and GHS labelling.
Customs clearance, documentation and transport and transport from port or warehouse.
Delivery to your site in the UAE or GCC, plus repeat-order planning.
Every lot of Hexamethylenediamine (HMDA) we supply is traceable to its manufacturer and production date. We check assay, water content, colour and aminocapronitrile, cyclic by-products and water against your requirement before dispatch so your formulation is not put at risk by off-spec material.
Hazardous. HMDA is corrosive, causes severe skin burns and eye damage, and is harmful if swallowed and toxic in contact with skin or if inhaled. It is combustible but not highly flammable. Always refer to the supplied SDS for the full classification and transport details.
Strength, colour and impurity limits agreed up front with approved makers.
COA, SDS and TDS with every consignment, plus transport paperwork handled.
Clear quotes with grade, packing, Incoterm and lead time so your purchase team can decide quickly.
COA, SDS, TDS, COO and DG paperwork ready for audits, customs and GCC export.
Delivery of Hexamethylenediamine (HMDA) across the seven Emirates and export to Saudi Arabia, Oman, Qatar, Kuwait and Bahrain.
From sample and trial lots to annual supply contracts and bulk programmes.
Common questions from UAE and GCC buyers about Hexamethylenediamine (HMDA) supply, specifications and delivery.
HMDA is used to make nylon 6,6 salt with adipic acid, nylon 6,10 and 6,12, hexamethylene diisocyanate (HDI) for polyurethanes, epoxy curing agents, polyamide and polyurea resins, corrosion inhibitors and textile and adhesive chemicals.
The CAS number of Hexamethylenediamine (HMDA) is 124-09-4. Its molecular formula is H₂N(CH₂)₆NH₂ and its molecular weight is 116.21 g/mol.
Hexamethylenediamine (HMDA) (CAS 124-09-4) is also sold as HMDA, 1,6-hexanediamine, 1,6-diaminohexane, hexane-1,6-diamine, HMD. Please mention the CAS number in your enquiry so we quote the right material.
Chelora Chemicals UAE is a B2B chemical supplier and distributor of Hexamethylenediamine (HMDA), serving Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with full COA, SDS and TDS documentation and export to the wider GCC.
Yes. We deliver to all seven Emirates, including Jebel Ali and JAFZA in Dubai, KEZAD, Musaffah and Khalifa Port in Abu Dhabi, and SAIF Zone and Hamriyah Free Zone in Sharjah, as well as RAKEZ, Ajman Free Zone and Fujairah.
We supply HMDA as a solid or melt with a purity of 99% or higher and as a 70% aqueous solution, as per COA. Please state the form, colour limit and your intended end use.
HMDA (CAS 124-09-4) is 1,6-hexanediamine. It is different from hexylamine (CAS 111-26-2, a monoamine), from hexamethylenetetramine (CAS 100-97-0), from 1,3-propanediamine (CAS 109-76-2), from isophorone diamine (CAS 2855-13-2) and from HDI (the diisocyanate). Please quote the CAS number.
Share the form (solid, melt or 70% solution), colour limit and packing, quantity, packing, Incoterm and delivery Emirate through our contact page and our team aims to respond within one business day.
Typically sealed HDPE or lined steel drums, with IBCs, flexitanks and ISO tanks for larger volumes. Solid or semi-solid grades can be supplied as flakes, in heated form or as a concentrated solution.
The minimum order depends on packing and current stock. We handle everything from a few drums or small packs for trials and lab qualification up to full container loads.
Store in tightly closed, clean containers in a cool, dry, well-ventilated area away from acids and oxidisers. Keep sealed to limit moisture and carbon dioxide uptake, and keep melted grades warm enough to stay pumpable.
HMDA is corrosive to skin and eyes and harmful if swallowed, toxic in contact with skin or if inhaled. It is combustible but not highly flammable. Use gloves, face and respiratory protection and follow the SDS, with extra care when handling the hot melt.
Yes. We export from the UAE to Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, East and West Africa, South Asia and other markets on EXW, FOB, CFR, CIF, DAP or DDP terms, subject to the import rules of each destination.
Yes. Samples are available for qualification on request, together with the COA and SDS, so your QC or R&D team can approve the material before a commercial order.
Equal amounts of HMDA and adipic acid are reacted in water to form nylon salt, a 1:1 salt that is then heated to polymerise into nylon 6,6. Exact stoichiometry is critical, so the purity and water content of both monomers are tightly controlled.
The 70% solution stays liquid at normal temperatures, avoiding the need to melt a solid that sets near 40 °C, and it can be pumped and metered directly into nylon-salt or resin processes that can accept the water.
Tell us your form (solid, melt or 70% solution), colour limit and packing, quantity, packing and delivery Emirate, and get a quote for Hexamethylenediamine (HMDA) from a trusted chemical supplier in the UAE.