Olefins, aromatics, refinery streams, polymers, rubbers, solvents, plasticizers, acids, reagents & inorganics for GCC and global buyers.
Excipients, vitamins and API intermediates for formulation and synthesis.
Aniline, fluoro and specialty building blocks for herbicide, fungicide and insecticide technicals.
Diazo components, nitroanilines, nitrobenzenes and chloro/fluoro aromatics for azo dyes, lake pigments and inks.
Anilines, toluidines, anisidines, phenylenediamines, aliphatic, cyclic, fatty and ethylene amines plus alkanolamines.
No exact match — we source specialty chemicals on request.
Ask for this productCan’t find your chemical? Sourced on request with COA & SDS, delivered across all 7 Emirates & the GCC.
Polymerisation-grade Styrene Monomer (CAS 100-42-5) — vinylbenzene feedstock for PS, EPS, ABS, SBR and UPR. Chelora Chemicals UAE delivers reliably to Dubai, Abu Dhabi, Sharjah and throughout the GCC.
Styrene Monomer (vinylbenzene, ethenylbenzene) is a colourless, flammable liquid with a characteristic sweet-aromatic odour. It is one of the most important petrochemical monomers in the world, produced primarily by the dehydrogenation of ethylbenzene. With a boiling point of approximately 145 °C and a molecular formula of C₈H₈, it is a vinyl aromatic compound that readily undergoes addition polymerisation and copolymerisation.
Chelora Chemicals UAE sources and distributes polymerisation-grade Styrene Monomer (≥99.5% purity) stabilised with TBC (4-tert-butylcatechol) to prevent premature polymerisation during storage and transit. Our supply chain covers the UAE mainland and free zones, as well as all six GCC member states.
Reference data for Styrene Monomer CAS 100-42-5 at polymerisation grade ≥ 99.5%. Always consult the current SDS and CoA for batch-specific values.
| Property | Value |
|---|---|
| Molecular Formula | C₈H₈ |
| Molecular Weight | 104.15 g/mol |
| Appearance | Colourless liquid |
| Boiling Point | ~145 °C (1 atm) |
| Melting Point | ~−30.6 °C |
| Density | ~0.906 g/cm³ (20 °C) |
| Refractive Index | 1.5469 (20 °C) |
| Vapour Pressure | ~7 mmHg (20 °C) |
| Flash Point | 31 °C (closed cup) |
| Solubility in Water | ~0.3 g/L at 20 °C |
| Log P (oct/water) | 2.95 |
| Viscosity | ~0.76 mPa·s at 20 °C |
| Parameter | Specification |
|---|---|
| Purity (GC) | ≥ 99.5% |
| Colour (Pt-Co APHA) | ≤ 10 |
| Ethylbenzene | ≤ 0.05% |
| Peroxide content | ≤ 0.002% |
| Inhibitor (TBC) | 10–15 ppm |
| Aldehydes (as HCHO) | ≤ 0.001% |
| Polymer content | ≤ 0.005% |
| Sulphur content | ≤ 1 ppm |
| Water content (KF) | ≤ 0.02% |
| Acidity (as acetic acid) | ≤ 0.001% |
| UN Number | UN 2055 |
| ADR Hazard Class | Class 3 (flammable) |
* Specifications represent typical polymerisation-grade values. Batch-specific Certificate of Analysis (CoA) is provided upon request. Values may differ for different inhibitor levels or storage conditions.
Need a full technical datasheet or batch CoA for Styrene Monomer?
Request TDS & CoA ›Styrene Monomer is a versatile vinyl aromatic building block used across six major polymer and resin manufacturing routes.
The primary downstream outlet for Styrene Monomer. General-purpose polystyrene (GPPS) and high-impact polystyrene (HIPS) are produced by bulk or suspension polymerisation, while expandable polystyrene (EPS) is widely used in thermal insulation boards, packaging and protective foam.
Styrene is a key terpolymer component in ABS engineering plastics alongside acrylonitrile and butadiene. ABS is valued for its toughness, rigidity and surface finish, making it essential for automotive components, consumer electronics housings and 3D printing filaments.
Emulsion or solution copolymerisation of styrene with butadiene produces SBR synthetic rubber, the most widely used elastomer globally. SBR is the dominant material in automotive tyre treads and sidewalls, conveyor belts, footwear soles and industrial rubber goods.
In UPR systems, Styrene Monomer serves simultaneously as a reactive diluent (reducing viscosity) and a cross-linking co-monomer that cures into the final thermoset matrix. It is indispensable for fibreglass-reinforced composites used in marine, construction and transportation.
Copolymerisation of styrene with acrylonitrile yields SAN, a transparent rigid resin used for kitchenware, laboratory ware and optical applications. Styrene-methyl methacrylate (SMMA) copolymers deliver superior clarity for display and lighting components.
Styrene Monomer is used to produce styrene-acrylic emulsion polymers that form the binder in interior and exterior architectural paints, industrial protective coatings and pressure-sensitive adhesives. These binders offer excellent water resistance and film-forming properties.
PS, HIPS, EPS and ABS producers consuming Styrene as primary monomer feedstock in continuous or batch polymerisation.
SBR and SEBS producers requiring high-purity monomer for emulsion or solution polymerisation processes.
Manufacturers of unsaturated polyester resins (UPR) and vinyl ester resins for fibreglass-reinforced and laminated composite structures.
EPS foam packaging converters and rigid PS thermoformers serving food-service, consumer goods and electronics packaging sectors.
ABS and HIPS compounders supplying interior trim, dashboards, bumper fascias and under-bonnet components to Tier 1 automotive suppliers.
EPS board producers and EIFS (external insulation finishing systems) manufacturers using expanded polystyrene for thermal and acoustic insulation.
Emulsion polymer manufacturers formulating styrene-acrylic latex for architectural paints, industrial coatings and pressure-sensitive adhesives.
Regional trading companies and chemical distributors requiring reliable Styrene Monomer supply for resale or further distribution across the MENA region.
Chelora Chemicals UAE maintains logistics coverage across every emirate and major industrial free zone, ensuring on-time Styrene Monomer supply wherever your facility is located.
Jebel Ali Free Zone (JAFZA), Dubai Industrial City, Al Quoz and DIP. Fast delivery to Dubai's plastics and chemicals manufacturing cluster.
ICAD I, II & III, Khalifa Industrial Zone (KIZAD), Musaffah and Ruwais petrochemical corridor supplied with polymerisation-grade Styrene.
Hamriyah Free Zone, SAIF Zone and Sharjah Industrial Area — serving resin producers and plastics compounders in the emirate.
Ajman Free Zone and Ajman Industrial Area — cost-effective Styrene Monomer supply for small and mid-scale polymer processors.
RAK Free Trade Zone and RAK Industrial Area — serving the emirate's growing advanced manufacturing and coatings sector.
Fujairah Free Zone and port-side facilities — strategic import and trans-shipment point for Styrene Monomer moving into the GCC.
UAQ Free Trade Zone — serving chemical distributors and light-manufacturing operations requiring Styrene Monomer supply.
Beyond the UAE, we arrange Styrene Monomer export to Saudi Arabia, Kuwait, Bahrain, Oman and Qatar with full documentation support.
Styrene Monomer is a flammable liquid (UN 2055, Class 3) and must be transported in approved containers that maintain inhibitor integrity and prevent premature polymerisation. Chelora Chemicals UAE offers multiple packaging configurations to suit order volumes and end-use requirements.
All containers are pre-inspected, nitrogen-blanketed where required, and shipped with the correct DG documentation including IMO declarations, Material Safety Data Sheets and inhibitor level certificates.
Full loads in ISO tank containers or flexitanks for large-volume polymerisation-grade Styrene.
Intermediate bulk containers for medium-volume orders. Suitable for pilot and mid-scale polymer runs.
Closed-head steel drums for small orders, sample purposes and research-grade requirements.
IMO DG declaration, MSDS, inhibitor certificates and CoA provided with every consignment.
Complete our online enquiry form or email us with your required volume, packaging preference and delivery location. Responses within 24 hours.
Our commercial team will confirm pricing, availability, lead time and logistics options for your specific Styrene Monomer requirement.
We provide the current Safety Data Sheet and Certificate of Analysis for your HSE and quality approval processes before order confirmation.
Issue your purchase order against our proforma invoice. We accept standard UAE commercial terms and Letter of Credit for export orders.
We arrange DG-compliant transport, prepare IMO declarations, inhibitor certificates and customs documents for UAE or GCC delivery.
Styrene Monomer is delivered to your facility or free zone address. Our technical team remains available for storage and handling queries post-delivery.
Every Styrene Monomer consignment shipped by Chelora Chemicals UAE is accompanied by a full documentation package to support your quality, regulatory and safety obligations.
Hazard Warning: Styrene Monomer is a flammable liquid (Flash Point 31 °C) and a possible human carcinogen (IARC Group 2A). It requires inhibitor maintenance (TBC), temperature-controlled storage below 25 °C, closed-system handling with adequate ventilation, and strict PPE (gloves, goggles, respirator) as specified in the SDS. Keep away from oxidising agents, heat and ignition sources.
We combine regional logistics expertise, technical knowledge and reliable supply to deliver polymerisation-grade Styrene Monomer precisely when and where you need it.
We supply only ≥99.5% purity Styrene Monomer, inhibited and certified to meet the strictest polymerisation process requirements for PS, ABS and SBR production.
Operating from within the UAE, we leverage Jebel Ali and other strategic ports for fast, cost-competitive delivery to all seven emirates and GCC export destinations.
Every shipment includes CoA, SDS, inhibitor certificate, IMO DG declaration and Certificate of Origin — everything your procurement, QA and customs teams require.
Our team has deep knowledge of Styrene Monomer chemistry, storage requirements and downstream polymer applications to provide meaningful technical guidance.
Quote turnaround within 24 hours. Dedicated account managers for regular buyers with flexible pricing on volume commitments and term supply agreements.
Full export documentation support for shipments to Saudi Arabia, Kuwait, Bahrain, Oman and Qatar, including Arabic-language customs declarations where required.
Primary aromatic feedstock for ethylbenzene and styrene production chain.
Key co-monomer with styrene in ABS, SAN and acrylic fibre production.
General-purpose and high-impact polystyrene produced from styrene monomer.
EPS beads for insulation and packaging — direct downstream of styrene.
Styrene Monomer (CAS 100-42-5) is primarily used as a monomer feedstock for the production of polystyrene (PS), expandable polystyrene (EPS), acrylonitrile butadiene styrene (ABS) and styrene-butadiene rubber (SBR). It also serves as a reactive diluent and co-monomer in unsaturated polyester resin (UPR) systems and is used in styrene-acrylic emulsion polymers for paints and coatings. Globally, over 85% of Styrene Monomer is consumed in polymer production, making it one of the most important petrochemical monomers in the world.
The CAS Registry Number for Styrene Monomer is 100-42-5. This is the unique chemical identifier used globally by chemists, procurement professionals, customs authorities and regulatory agencies. The EINECS number is 202-851-5, and the UN number for transport purposes is UN 2055 (Styrene Monomer, stabilised).
Styrene Monomer is known by several synonyms: Styrene, Vinylbenzene, Ethenylbenzene (IUPAC name) and Phenylethylene. In trade contexts it is most commonly referred to simply as "Styrene" or "Styrene Monomer" to distinguish it from polystyrene polymers. Its molecular formula is C₈H₈ and it belongs to the chemical family of vinyl aromatic monomers.
Chelora Chemicals UAE is a dedicated Styrene Monomer supplier serving the UAE and wider GCC region. We source polymerisation-grade Styrene Monomer (≥99.5% purity) and supply it to plastics compounders, rubber manufacturers, resin producers, coatings formulators and chemical distributors across all seven UAE emirates and GCC export destinations including Saudi Arabia, Kuwait, Bahrain, Oman and Qatar.
Yes. Chelora Chemicals UAE delivers Styrene Monomer to all seven emirates including Dubai (Jebel Ali, DIP, Al Quoz), Abu Dhabi (ICAD, KIZAD, Musaffah), Sharjah (Hamriyah Free Zone, SAIF Zone), as well as Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. We have established logistics routes covering both mainland industrial areas and the major free zones across the UAE.
We supply polymerisation-grade Styrene Monomer with a purity of ≥ 99.5% as measured by gas chromatography (GC). Key quality parameters include colour (APHA) ≤ 10, ethylbenzene content ≤ 0.05%, peroxide content ≤ 0.002%, inhibitor (TBC) at 10–15 ppm, and polymer content ≤ 0.005%. A full Certificate of Analysis (CoA) is provided with each batch. Customers with specific purity requirements can contact us to discuss available specifications.
Yes. Styrene Monomer is classified as a flammable liquid (Flash Point 31 °C, UN Class 3) and as a possible human carcinogen by the International Agency for Research on Cancer (IARC Group 2A). Key hazards include flammability, vapour inhalation risk (TWA 20 ppm recommended exposure limit), skin and eye irritation, and the potential for thermal polymerisation if not properly inhibited. Safe handling requires closed-system processing, adequate local exhaust ventilation, temperature control below 25 °C, and PPE including chemical-resistant gloves, safety goggles and a respirator. Consult the full Safety Data Sheet (SDS) before handling.
Our minimum order quantity for Styrene Monomer is one 200-litre steel drum for laboratory and sample requirements. For commercial supply, we commonly fulfil orders in IBC (1,000 L) quantities and full ISO tank loads for bulk polymerisation applications. We also accommodate custom volume requirements — please contact our sales team with your specific needs and we will find the most suitable packaging and logistics solution for you.
Chelora Chemicals UAE offers Styrene Monomer in the following packaging configurations: ISO tank containers and flexitanks for bulk orders, 1,000-litre IBCs (intermediate bulk containers) for mid-volume requirements, and 200-litre closed-head steel drums for smaller orders and laboratory samples. All containers are DG-compliant for UN 2055, nitrogen-blanketed where required, and shipped with inhibitor level certification to maintain product quality during transit.
Styrene Monomer should be stored in tightly sealed, approved containers (steel drums, IBCs or tanks) in a cool, dry, well-ventilated area away from heat sources, direct sunlight and open flames. Recommended storage temperature is below 25 °C to minimise evaporation and slow uninhibited polymerisation. The TBC inhibitor in our product requires the presence of dissolved oxygen to remain effective — tanks should not be completely purged of oxygen. Storage areas should be classified as hazardous (Zone 2) and equipped with earthing/bonding, explosion-proof electrical equipment and appropriate fire suppression. Shelf life is typically 6 months from date of manufacture when stored correctly.
Yes. Chelora Chemicals UAE arranges export of Styrene Monomer to all GCC member states (Saudi Arabia, Kuwait, Bahrain, Oman and Qatar) as well as broader MENA markets. We prepare the full export documentation package including IMO dangerous goods declaration, Certificate of Analysis, Certificate of Origin, inhibitor certificate and customs clearance documents. Our logistics team is experienced in handling UN 2055 DG shipments by road and sea.
Styrene Monomer (C₈H₈) is the liquid starting material — a small vinyl aromatic molecule that readily undergoes addition polymerisation. Polystyrene (PS) is the solid polymer product formed when thousands of styrene monomer units link together into long molecular chains. In practical terms, Styrene Monomer is a flammable, volatile liquid with a sweet odour handled as a hazardous chemical, while polystyrene is a rigid, non-flammable (or self-extinguishing) thermoplastic solid sold as pellets, foam beads or moulded products. The transformation from monomer to polymer occurs during the manufacturing process using heat and/or initiators, releasing the polymerisation energy as heat.
Contact Chelora Chemicals UAE for competitive pricing, fast delivery and full documentation on Styrene Monomer (CAS 100-42-5). Our team responds within 24 hours.