Marhaba · مرحباً
Chemical supply across all 7 Emirates التوريد إلى الإمارات السبع COA, SDS & TDS with every order مستندات كاملة مع كل طلب Jebel Ali · KEZAD · SAIF Zone · Hamriyah · RAKEZ Small lots to full container loads من العينات حتى الحاويات الكاملة

Petrochemicals

Olefins, aromatics, refinery streams, polymers, rubbers, solvents, plasticizers, acids, reagents & inorganics for GCC and global buyers.

Dyes

Diazo components, nitroanilines, nitrobenzenes and chloro/fluoro aromatics for azo dyes, lake pigments and inks.

Amines

Anilines, toluidines, anisidines, phenylenediamines, aliphatic, cyclic, fatty and ethylene amines plus alkanolamines.

    No exact match — we source specialty chemicals on request.

    Ask for this product

    Can’t find your chemical? Sourced on request with COA & SDS, delivered across all 7 Emirates & the GCC.

    Dimethylformamide Supplier UAE | CAS 68-12-2 | Chelora Chemicals
    UAE-Stocked · Jebel Ali Logistics
    ثنائي ميثيل فورماميد — موردون في الإمارات

    Dimethylformamide Supplier
    UAE

    Dimethylformamide — DMF (CAS 68-12-2) — 99.9% industrial grade. Serving PU synthetic leather, acrylic and spandex fibre, pharmaceutical, agrochemical and electronics industries across the UAE and GCC.

    CAS68-12-2Purity99.9%+ minFormulaC₃H₇NOFormClear Liquid

    DMF

    POLAR APROTIC SOLVENT
    C₃H₇NO — CAS 68-12-2CCCCCXN,N-Dimethylformamide
    AmideN,N-dimethyl
    Bp 153 °CMedium volatility
    MW 73.09g/mol
    7+UAE Emirates Served — next-day delivery available
    99.9%Minimum purity — industrial grade
    Drum/ISODrums, IBCs and bulk
    24hQuote turnaround on standard inquiries

    Product Overview

    What is Dimethylformamide?

    Dimethylformamide (C₃H₇NO), commonly abbreviated DMF, is a colourless, high-boiling polar aprotic solvent produced by reacting dimethylamine with carbon monoxide or methyl formate. It is fully miscible with water and most organic solvents.

    DMF's ability to dissolve polar polymers makes it the key solvent for polyurethane synthetic leather coatings and for wet and dry spinning of acrylic and spandex fibres. It is recovered by distillation and reused in most large plants.

    DMF is also widely used as a reaction solvent in pharmaceutical and agrochemical synthesis, in electronics and PCB manufacture, in polymer films and coatings, and as an absorption medium for acetylene and butadiene. Chelora Chemicals UAE supplies DMF across the UAE and wider GCC.

    • Key solvent for PU synthetic leather and coated fabrics
    • Spinning solvent for acrylic and spandex fibres
    • Reaction solvent in pharmaceutical synthesis
    • Agrochemical intermediate and formulation solvent
    • Used in PCB manufacture and electronics
    • Absorption solvent for acetylene and butadiene
    • Solvent for PU and acrylic films and coatings
    • Supplied in drums, IBCs and ISO tanks

    Quick Reference

    Product name
    Dimethylformamide (DMF)
    Synonyms
    N,N-Dimethylformamide, DMFA, Formic Acid Dimethylamide
    CAS number
    68-12-2
    Molecular formula
    C₃H₇NO
    Chemical family
    Amide (Polar Aprotic Solvent)
    Category
    Specialty Solvents
    Purity grade
    99.9%+
    Molecular weight
    73.09 g/mol
    Availability
    Drums, IBCs, ISO tanks

    Technical Specifications

    Dimethylformamide — Properties & Grades

    Key physical and chemical properties of Dimethylformamide as supplied by Chelora Chemicals UAE. Grade-specific data sheets available on request.

    Physical & Chemical Properties

    PropertyTypical Value
    CAS Number68-12-2
    Molecular FormulaC₃H₇NO
    Molecular Weight73.09 g/mol
    Physical StateClear, colourless liquid
    Boiling Point153 °C
    Melting Point−61 °C
    Flash Point58 °C (closed cup)
    Density @20 °C0.944 g/cm³
    OdourFaint, fishy (amine)
    Solubility in WaterFully miscible

    Purity & Quality Parameters

    PropertyTypical Value
    DMF Content99.9 wt% minimum
    Water Content≤ 0.05 wt%
    Methanol≤ 0.002 wt%
    Formic Acid≤ 0.002 wt%
    Dimethylamine≤ 0.0015 wt%
    Colour (Pt-Co)≤ 5
    Iron≤ 0.05 ppm
    Electrical Conductivity≤ 2 μS/cm
    pH (20% aqueous, 25 °C)6.5–8.0
    AppearanceClear, free of suspended matter

    * All values are typical ranges for standard commercial Dimethylformamide grades. Precise values depend on the production source and grade. Contact Chelora Chemicals UAE for grade-specific technical data sheets and SDS.

    Need high-purity DMF for your PU leather, fibre or pharma process?

    Request Technical Datasheet

    Applications

    Key Applications of Dimethylformamide

    DMF's strong solvency for polar polymers makes it a core processing solvent for synthetic leather, fibre and pharmaceutical industries across the UAE and GCC.

    PU Synthetic Leather

    Solvent for wet and dry PU coating of synthetic leather and coated fabrics.

    Acrylic & Spandex Fibres

    Spinning solvent for polyacrylonitrile and elastane fibres.

    Pharmaceuticals

    Reaction medium for API synthesis, peptide coupling and crystallisation.

    Agrochemicals

    Intermediate and solvent for pesticide synthesis and formulation.

    Electronics

    PCB manufacturing, cleaning and polymer film production.

    Gas Absorption

    Selective absorption of acetylene and extraction of butadiene.

    Industries Served

    Industries Using Dimethylformamide in the UAE

    Chelora Chemicals UAE supplies Dimethylformamide to all key synthetic leather, fibre and pharmaceutical sectors, backed by technical support and fast in-country delivery.

    01

    Synthetic Leather Producers

    PU leather and coated fabric manufacturers.

    02

    Fibre Producers

    Acrylic and spandex fibre plants.

    03

    Pharmaceutical Manufacturers

    API and intermediate producers.

    04

    Agrochemical Manufacturers

    Pesticide synthesis and formulation.

    05

    Electronics Manufacturers

    PCB and polymer film producers.

    06

    Coatings & Adhesives

    Producers of PU and acrylic coatings.

    07

    Petrochemical Plants

    Acetylene and butadiene recovery units.

    08

    Chemical Traders & Distributors

    Regional distributors supplying DMF across the GCC, Middle East and Africa.

    UAE & GCC Coverage

    Dimethylformamide Supply Across the UAE & GCC

    Our UAE-based storage and Jebel Ali logistics position ensure fast Dimethylformamide delivery to all emirates and GCC export markets.

    دبي

    Dubai

    Same-day and next-day Dimethylformamide delivery within Dubai, including Jebel Ali FZ, Al Quoz and DIP industrial users.

    Jebel Ali FZAl QuozDIP
    أبوظبي

    Abu Dhabi

    Serving ICAD, Musaffah and KIZAD manufacturers with Dimethylformamide for PU synthetic leather, acrylic fibre, pharmaceutical and agrochemical.

    MusaffahICADKIZAD
    الشارقة

    Sharjah

    Dimethylformamide supply to Sharjah Industrial Area, SAIF Zone and Hamriyah FZ manufacturers.

    SAIF ZoneHamriyah FZIndustrial Areas
    عجمان

    Ajman

    Delivery to Ajman Industrial Area and Ajman Free Zone supporting manufacturers and chemical distributors.

    Ajman IndustrialAjman FZ
    رأس الخيمة

    Ras Al Khaimah

    Supply to RAK Industrial Zone and RAKIA manufacturers requiring Dimethylformamide.

    RAK IndustrialRAKIA
    الفجيرة

    Fujairah

    Fujairah Free Zone and port area customers served with Dimethylformamide for local use and bulk export.

    Fujairah FZPort Area
    أم القيوين

    Umm Al Quwain

    UAQ Free Trade Zone industrial customers supplied with competitive Dimethylformamide pricing and reliable same-week delivery.

    UAQ FTZIndustrial
    دول مجلس التعاون

    GCC & Export

    Regular Dimethylformamide exports to Saudi Arabia, Qatar, Kuwait, Bahrain, Oman and wider MENA. Full freight, customs documentation and COO support available.

    Saudi ArabiaQatarKuwaitOmanBahrain

    Packaging Options

    Dimethylformamide Packaging

    Chelora Chemicals UAE offers a full range of packaging configurations for Dimethylformamide, from small drums for laboratories and formulators to bulk ISO tanks for large-volume users and export buyers. All packaging is correctly labelled to GHS and dangerous goods requirements and supplied with the corresponding Certificate of Analysis (CoA) and Safety Data Sheet (SDS).

    Drums and IBCs are filled under nitrogen-blanketed or closed-loop conditions where required to protect product quality, while bulk ISO tanks and road tankers serve continuous-process plants with dedicated, cleaned equipment.

    • 190 kg steel / HDPE drums — standard pack for formulators
    • 1,000 L IBC totes — medium-volume buyers
    • ISO tanks — bulk export shipments
    • Bulk road tanker — large UAE-based plants

    Drums

    190 kg drums for smaller users and formulators.

    IBC Totes

    1,000 L IBCs for medium-volume buyers.

    ISO Tank

    Bulk export shipments across the GCC and beyond.

    Bulk Tanker

    Direct delivery to large UAE plants.

    How To Order

    Order Dimethylformamide from Chelora Chemicals UAE

    Six simple steps to receive Dimethylformamide at your facility anywhere in the UAE or GCC.

    Specify Your Grade

    Provide your required grade, purity specification, packaging and volume. Our technical team can advise if needed.

    Request a Quote

    Submit your inquiry via our online contact form, email or telephone. We provide competitive pricing with a formal written quote within 24 hours. Volume discounts apply for larger quantities.

    Review CoA & SDS

    Receive the batch Certificate of Analysis confirming key quality parameters, together with the GHS-compliant Safety Data Sheet, before order confirmation.

    Confirm Order & Payment

    Confirm your order in writing. Standard credit terms are available for approved customers. New customers can arrange advance payment or letter of credit for large shipments.

    Arrange Logistics

    Select from our UAE door-to-door delivery service, Jebel Ali Free Zone warehouse collection, or let us arrange freight for GCC and wider export destinations.

    Receive & Process

    Dimethylformamide is delivered with full documentation. Inspect the batch on receipt against the CoA. Our technical support team remains available for any process or reorder queries.

    Quality & Safety

    Quality Assurance & Safety Information

    Chelora Chemicals UAE sources Dimethylformamide from globally recognised manufacturers operating under ISO 9001 quality management systems. Every batch is supplied with a Certificate of Analysis (CoA) confirming purity, water, methanol, formic acid, amines and colour against the published grade specification.

    CoACertificate of Analysis per batch
    SDSSafety Data Sheet (GHS / REACH)
    TDSTechnical Data Sheet per grade

    Safety Note: Dimethylformamide is a flammable liquid that is harmful in contact with skin or if inhaled, causes serious eye irritation and may damage the unborn child. It is readily absorbed through the skin. Use closed systems, ventilation and chemical-resistant gloves. Consult the full SDS before handling.

    • Classified Reproductive Toxicity 1B and Flammable Liquid 3 (GHS)
    • Harmful in contact with skin or if inhaled; absorbed through skin
    • SDS compliant with GHS / UN Globally Harmonised System
    • Use earthed equipment and local exhaust ventilation

    Regulatory & Compliance

    UN Number
    UN 2265 (N,N-Dimethylformamide)
    GHS Classification
    Flam. Liq. 3; Acute Tox. 4 (dermal, inhal.); Eye Irrit. 2; Repr. 1B
    Transport (ADR/IATA)
    Class 3 (Flammable liquid), PG III
    REACH
    Registered; Annex XVII restriction (entry 76) and SVHC
    Flash Point
    58 °C
    Documentation
    CoA, SDS, TDS supplied with every order
    Customs HS Code
    2924.19 (Acyclic amides)

    Why Chelora

    Why Choose Chelora Chemicals UAE for Dimethylformamide?

    01

    UAE-Stocked, Fast Turnaround

    Dimethylformamide is held in UAE storage, enabling same-day or next-day delivery to Dubai, Abu Dhabi, Sharjah and all other emirates.

    02

    Grade Selection Expertise

    Our technical specialists help match the correct DMF specification to your PU, fibre or pharmaceutical process, including low-amine and low-water requirements.

    03

    Verified Documentation Every Order

    Every shipment is accompanied by a batch-specific Certificate of Analysis, a GHS-compliant Safety Data Sheet and Technical Data Sheet. Export orders include Certificates of Origin and all required customs documentation.

    04

    Competitive GCC-Wide Pricing

    Our strong supplier relationships and Jebel Ali logistics advantage allow us to price Dimethylformamide competitively across the GCC, from small packs to full bulk loads.

    05

    Compliance Guidance

    We supply up-to-date SDS and regulatory information, including REACH restriction details, to support safe workplace handling of DMF.

    06

    Responsive Technical & Commercial Support

    Our bilingual (English/Arabic) sales and technical team provides rapid responses to inquiries, proactive recommendations, order status updates and after-delivery support.

    FAQ

    Frequently Asked Questions — Dimethylformamide UAE

    Dimethylformamide is used as a solvent for PU synthetic leather; for spinning acrylic and spandex fibres; as a reaction solvent in pharmaceutical and agrochemical synthesis; in electronics; and for acetylene and butadiene absorption.

    The CAS number for Dimethylformamide (C₃H₇NO) is 68-12-2. It is transported under UN 2265 as a Class 3 flammable liquid.

    Both are polar aprotic solvents with similar dissolving power. DMF has a lower boiling point (153 °C vs 202 °C) and is easier to remove, making it common in PU leather and fibres. NMP is less volatile and is preferred for battery slurries and petrochemical extraction.

    Yes. In the EU, DMF is restricted under REACH Annex XVII, which sets workplace exposure limits for use at 0.3% or more. Customers exporting products to the EU should check compliance requirements.

    Chelora Chemicals UAE is a dedicated Dimethylformamide supplier serving all seven UAE emirates. We stock drums, IBCs and bulk ISO tank supply, serving the PU synthetic leather, acrylic fibre, pharmaceutical and agrochemical industries across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain.

    Yes. Chelora Chemicals UAE delivers Dimethylformamide to all seven UAE emirates — Dubai (including Jebel Ali FZ, Al Quoz and DIP), Abu Dhabi (Musaffah, ICAD, KIZAD), Sharjah (SAIF Zone, Hamriyah FZ), Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain — as well as to Saudi Arabia, Qatar, Kuwait, Bahrain, Oman and other GCC countries.

    Yes. DMF is a flammable liquid, harmful by skin contact and inhalation, an eye irritant, and is classified as a reproductive toxicant that may damage the unborn child. It is readily absorbed through the skin. Use closed systems, ventilation and chemical-resistant PPE, and always consult the batch-specific SDS.

    Chelora Chemicals UAE supplies Dimethylformamide in 190 kg drums (standard pack), 1,000 L IBC totes (medium volume), ISO tanks (bulk export), bulk road tankers (large-volume UAE plants).

    Yes. Chelora Chemicals UAE regularly exports Dimethylformamide to Saudi Arabia, Qatar, Kuwait, Bahrain, Oman and wider markets across Asia, Africa and Europe, leveraging our proximity to Jebel Ali Port. We handle export logistics including freight forwarding, customs documentation, certificate of origin (COO), dangerous goods declarations and safety data sheets in Arabic and English.

    Get a Quote Today

    Buy Dimethylformamide in UAE — Fast Delivery

    Chelora Chemicals UAE holds Dimethylformamide in stock in drums, IBCs and bulk. Request a quote and receive a response within 24 hours. UAE delivery, GCC export and full documentation available.

    Dimethylformamide supplier UAEDMF DubaiCAS 68-12-2DMF solvent UAEDimethylformamide Abu Dhabibuy DMF UAEDMF exporter Jebel AliDMF SharjahDMF solvent supplier GCCN,N-dimethylformamide Dubai