MDI Intermediate
Phosgenated in integrated plants to make MDI for polyurethane foams, elastomers and adhesives.
Olefins, aromatics, refinery streams, polymers, rubbers, solvents, plasticizers, acids, reagents & inorganics for GCC and global buyers.
Excipients, vitamins and API intermediates for formulation and synthesis.
Aniline, fluoro and specialty building blocks for herbicide, fungicide and insecticide technicals.
Diazo components, nitroanilines, nitrobenzenes and chloro/fluoro aromatics for azo dyes, lake pigments and inks.
Anilines, toluidines, anisidines, phenylenediamines, aliphatic, cyclic, fatty and ethylene amines plus alkanolamines.
No exact match — we source specialty chemicals on request.
Ask for this productCan’t find your chemical? Sourced on request with COA & SDS, delivered across all 7 Emirates & the GCC.
Chelora Chemicals UAE supplies 4,4′-Methylenedianiline (MDA) (CAS 101-77-9) as flakes and granules to polyurethane, epoxy, polyimide and specialty-polymer manufacturers across Dubai, Abu Dhabi, Sharjah and all seven Emirates, against documented end use, with batch-wise COA, sealed packing and compliant delivery.
4,4′-Methylenedianiline (MDA, 4,4′-diaminodiphenylmethane, DDM) is an aromatic diamine in which two aminophenyl rings are joined by a methylene bridge, a tan to light brown crystalline solid supplied as flakes or granules. It is only slightly soluble in water and dissolves in ethanol and many organic solvents.
Its main use is as the intermediate for MDI (methylene diphenyl diisocyanate) in polyurethanes. It is also used as a curing agent for epoxy resins, a monomer for polyimides and bismaleimides, a chain extender in specialty polyurethanes and an intermediate for dyes and high-performance composites.
As an established chemical supplier in the UAE, Chelora Chemicals sources 4,4′-Methylenedianiline (MDA) from approved manufacturers with consistent assay and low levels of 2,4′-isomer, aniline and water, and delivers it to customers in Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, as well as export customers in Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, Africa and South Asia.
Typical specification and physical data for 4,4′-Methylenedianiline (MDA) supplied in the UAE. Limits depend on the grade, and batch-specific values are always confirmed on the Certificate of Analysis.
| Parameter | Specification |
|---|---|
| Appearance | Tan to light brown flakes, crystals or granules |
| Assay | Not less than 99.0% (typical) |
| 2,4′-Isomer & aniline | As per COA / customer requirement |
| Water (Karl Fischer) | Not more than 0.3% (typical) |
| Density (20 °C) | Approx. 1.15 g/cm³ |
| Boiling point | Approx. 398 – 399 °C |
| Grade | Technical / synthesis grade, as per COA |
| Packing & documents | Drums, IBCs, ISO tanks; COA, SDS, TDS, COO |
| Property | Value |
|---|---|
| Chemical name | 4,4′-Methylenedianiline |
| CAS number | 101-77-9 |
| Molecular formula | CH₂(C₆H₄NH₂)₂ |
| Molecular weight | 198.26 g/mol |
| Physical state (20 °C) | Crystalline solid |
| Melting / boiling point | 89 – 91 °C / Approx. 398 – 399 °C |
| Solubility | Slightly soluble in water; soluble in ethanol, ether and benzene |
| Sensitivity | Darkens in light and air; toxic; regulated as a substance of concern in some markets; keep sealed and dry |
Values are typical literature data for reference only and do not form a sales specification. Contact us for the latest TDS and batch COA.
Need a specific assay, isomer limit or form for epoxy-curing or polymer use? We match your spec to approved makers, against documented end use.
Share Your Specification →From polyurethane intermediates to high-temperature epoxy and polyimide systems, MDA is a specialist aromatic diamine for industrial polymer makers in the UAE and GCC.
Phosgenated in integrated plants to make MDI for polyurethane foams, elastomers and adhesives.
Hardens epoxy resins for high-temperature composites, tooling and electrical parts.
A diamine monomer for heat-resistant films, laminates and composites.
A chain extender and crosslinker in selected elastomer systems.
Used in selected colorant chemistry.
Used in laboratory polymer and ligand synthesis.
Our UAE customers for 4,4′-Methylenedianiline (MDA) are industrial manufacturers and licensed distributors, supplied against documented end use.
MDI value chains.
High-temperature hardeners.
Diamine monomers.
Intermediate routes.
Verified Dubai and Sharjah traders re-exporting within the rules of each destination.
Synthesis labs needing small lots with full documentation.
Campaign-based production for global brands.
Verified importers in the GCC, Africa and South Asia, subject to import rules.
We supply 4,4′-Methylenedianiline (MDA) to industrial areas, ports and free zones throughout the UAE, with re-export to the wider GCC and beyond.
Fast local delivery to polyurethane, epoxy, polyimide and specialty-polymer manufacturers in Dubai, plus re-export via Jebel Ali Port.
Supply to polyurethane, epoxy, polyimide and specialty-polymer manufacturers in Musaffah, KEZAD and around Khalifa Port.
Serving polyurethane, epoxy, polyimide and specialty-polymer manufacturers across Sharjah's industrial areas and free zones.
Reliable deliveries for Ajman-based polyurethane, epoxy, polyimide and specialty-polymer manufacturers from our UAE stock and import programme.
Supplying polyurethane, epoxy, polyimide and specialty-polymer manufacturers in RAK's free zones and ports.
Road delivery to the east coast with access to Port of Fujairah for regional shipments.
Consolidated with our northern Emirates deliveries for factories and traders.
Export from the UAE on EXW, FOB, CFR, CIF, DAP or DDP terms.
MDA darkens in light and air and is toxic, so we ship it in sealed, lined drums or bags with toxic-substance labelling, planned to stay dry and protected through UAE summer transit.
Whether you need a few drums for a pilot batch or regular bulk loads for continuous production, we plan packing, labelling, documentation and transport from port or warehouse to your gate.
Sealed lined steel or HDPE drums, as per grade.
Moisture-protected bags and sealed trial packs.
Stretch-wrapped pallets for regular supply.
EXW UAE, FOB Jebel Ali / Khalifa, CFR, CIF, DAP, DDP.
A simple, transparent procurement process built for busy purchase teams.
Send product name, CAS 101-77-9, assay, form and packing, quantity, packing and delivery Emirate.
We match approved makers and send a quotation with packing, Incoterm and lead time.
COA, SDS and TDS shared upfront, with 4,4′-Methylenedianiline (MDA) samples available for qualification.
We lock in the batch, arrange sealed packing and GHS labelling.
Customs clearance, regulatory and transport documentation and transport from port or warehouse.
Delivery to your site in the UAE or GCC, plus repeat-order planning.
Every lot of 4,4′-Methylenedianiline we supply is traceable to its manufacturer and production date. We check assay, isomer content and moisture against your requirement before dispatch. MDA is regulated as a substance of concern in some markets, so supply is made only against documented industrial end use and in line with UAE and destination-country rules.
Hazardous. 4,4′-Methylenedianiline is toxic if swallowed, may cause an allergic skin reaction, is suspected of causing genetic defects, may cause cancer, can cause damage to the liver and is toxic to aquatic life with long-lasting effects. It is treated as a substance of very high concern in some jurisdictions. Always refer to the supplied SDS for the full classification and transport details.
Approved makers and end-use checks suited to a regulated aromatic amine.
Hazard labelling, SDS and transport documents are prepared for every consignment.
Clear quotes with grade, packing, Incoterm and lead time so your purchase team can decide quickly.
COA, SDS, TDS, COO and DG paperwork ready for audits, customs and GCC export.
Delivery of 4,4′-Methylenedianiline (MDA) across the seven Emirates and export to Saudi Arabia, Oman, Qatar, Kuwait and Bahrain.
From sample and trial lots to annual supply contracts and bulk programmes.
Common questions from UAE and GCC buyers about 4,4′-Methylenedianiline (MDA) supply, specifications and delivery.
MDA is used as an intermediate for MDI in polyurethanes, as a curing agent for epoxy resins, as a monomer for polyimides and bismaleimides, as a specialty chain extender and in dye and fine-chemical synthesis.
The CAS number of 4,4′-Methylenedianiline (MDA) is 101-77-9. Its molecular formula is CH₂(C₆H₄NH₂)₂ and its molecular weight is 198.26 g/mol.
4,4′-Methylenedianiline (MDA) (CAS 101-77-9) is also sold as MDA, 4,4′-diaminodiphenylmethane, DDM, 4,4′-methylenebisbenzenamine, bis(4-aminophenyl)methane, 4,4′-methylenedianiline. Please mention the CAS number in your enquiry so we quote the right material.
Chelora Chemicals UAE is a B2B chemical supplier and distributor of 4,4′-Methylenedianiline (MDA), serving Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with full COA, SDS and TDS documentation and export to the wider GCC.
Yes. We deliver to all seven Emirates, including Jebel Ali and JAFZA in Dubai, KEZAD, Musaffah and Khalifa Port in Abu Dhabi, and SAIF Zone and Hamriyah Free Zone in Sharjah, as well as RAKEZ, Ajman Free Zone and Fujairah.
We supply MDA as flakes and granules with an assay of 99% or higher, as per COA. Please state the assay, isomer limit, form and your intended end use.
4,4′-MDA (CAS 101-77-9) is the diamine with a methylene bridge between two aminophenyl rings. It is different from MDI (the diisocyanate), from polymeric MDA, from MOCA (CAS 101-14-4, with two chlorine atoms), from 4,4′-oxydianiline and from aniline. Please quote the CAS number.
Share the assay, form and packing, quantity, packing, Incoterm and delivery Emirate through our contact page and our team aims to respond within one business day.
Typically 25 kg lined drums or bags, with smaller sealed packs for trials. Packs are sealed against moisture and air and labelled for toxic-substance transport as per the SDS.
The minimum order depends on packing and current stock. We handle everything from a few drums or small packs for trials and lab qualification up to full container loads.
Store in tightly closed containers in a cool, dry, well-ventilated place, protected from light and away from oxidisers, acids and nitrating agents. Reseal opened packs promptly because the product darkens in air.
Yes. MDA is toxic if swallowed, a skin sensitiser, a suspected mutagen and may cause cancer, and it can damage the liver. It is regulated in some markets. Use closed systems, full protective equipment and health surveillance, and follow the SDS.
Yes. We export from the UAE to Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, East and West Africa, South Asia and other markets on EXW, FOB, CFR, CIF, DAP or DDP terms, subject to the import rules of each destination.
Yes. Samples are available for qualification on request, together with the COA and SDS, so your QC or R&D team can approve the material before a commercial order.
In several jurisdictions MDA is listed as a substance of very high concern or subject to authorisation, and in many places occupational exposure is tightly limited. We supply only against documented industrial end use and in line with UAE and destination-country rules, so please share your company and application details with the enquiry.
Its rigid aromatic structure gives cured epoxy a high glass-transition temperature and good chemical and thermal resistance, which suits composites, tooling and electrical insulation. Where handling rules or substitutes apply, buyers also compare it against other aromatic and cycloaliphatic hardeners.
Tell us your assay, form and packing, quantity, packing and delivery Emirate, and get a quote for 4,4′-Methylenedianiline (MDA) from a trusted chemical supplier in the UAE.