Meta-Aramid Fibres
Reacted with isophthaloyl chloride to make heat- and flame-resistant fibres and papers.
Olefins, aromatics, refinery streams, polymers, rubbers, solvents, plasticizers, acids, reagents & inorganics for GCC and global buyers.
Excipients, vitamins and API intermediates for formulation and synthesis.
Aniline, fluoro and specialty building blocks for herbicide, fungicide and insecticide technicals.
Diazo components, nitroanilines, nitrobenzenes and chloro/fluoro aromatics for azo dyes, lake pigments and inks.
Anilines, toluidines, anisidines, phenylenediamines, aliphatic, cyclic, fatty and ethylene amines plus alkanolamines.
No exact match — we source specialty chemicals on request.
Ask for this productCan’t find your chemical? Sourced on request with COA & SDS, delivered across all 7 Emirates & the GCC.
Chelora Chemicals UAE supplies m-Phenylenediamine (CAS 108-45-2) as flakes and crystals to aramid-fibre, epoxy, dye, rubber and specialty-polymer manufacturers across Dubai, Abu Dhabi, Sharjah and all seven Emirates, against documented end use, with batch-wise COA, sealed packing and compliant delivery.
m-Phenylenediamine (mPDA, MPD, 1,3-diaminobenzene) is an aromatic diamine with two amino groups in the meta positions of a benzene ring, a white to light brown crystalline solid that turns darker on exposure to air and light. It is freely soluble in water and in ethanol.
Its main use is as a monomer for meta-aramid fibres used in heat- and flame-resistant fabrics and filters. It is also an epoxy curing agent, an intermediate for azo and sulphur dyes, a component in rubber-to-fabric adhesion systems, an intermediate for polyurethane and polyamide resins and a reagent and corrosion-inhibitor intermediate.
As an established chemical supplier in the UAE, Chelora Chemicals sources m-Phenylenediamine from approved manufacturers with consistent assay and low levels of o- and p-isomers, nitroaniline and water, and delivers it to customers in Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, as well as export customers in Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, Africa and South Asia.
Typical specification and physical data for m-Phenylenediamine supplied in the UAE. Limits depend on the grade, and batch-specific values are always confirmed on the Certificate of Analysis.
| Parameter | Specification |
|---|---|
| Appearance | White to light brown flakes or crystals |
| Assay | Not less than 99.0% (typical) |
| o- & p-Isomers | As per COA / customer requirement |
| Water (Karl Fischer) | Not more than 0.3% (typical) |
| Density (20 °C) | Approx. 1.14 g/cm³ |
| Boiling point | Approx. 282 – 284 °C |
| Grade | Technical / synthesis grade, as per COA |
| Packing & documents | Drums, IBCs, ISO tanks; COA, SDS, TDS, COO |
| Property | Value |
|---|---|
| Chemical name | Benzene-1,3-diamine |
| CAS number | 108-45-2 |
| Molecular formula | C₆H₄(NH₂)₂ |
| Molecular weight | 108.14 g/mol |
| Physical state (20 °C) | Crystalline solid |
| Melting / boiling point | 63 – 65 °C / Approx. 282 – 284 °C |
| Solubility | Freely soluble in water and ethanol |
| Sensitivity | Darkens rapidly in air and light; toxic; keep sealed, dry and protected from light |
Values are typical literature data for reference only and do not form a sales specification. Contact us for the latest TDS and batch COA.
Need a specific assay, isomer limit or colour for aramid or epoxy use? We match your spec to approved makers, against documented end use.
Share Your Specification →From heat-resistant aramid fibre to epoxy hardeners and dyes, m-Phenylenediamine is a versatile aromatic diamine for manufacturers in the UAE and GCC.
Reacted with isophthaloyl chloride to make heat- and flame-resistant fibres and papers.
Hardens epoxy resins for adhesives, composites and electrical parts.
A coupling component for azo, sulphur and hair-dye chemistries.
Used in selected rubber-to-fabric bonding systems.
A monomer and chain extender in specialty polymers.
Used in analytical reagents and corrosion-inhibitor synthesis.
Our UAE customers for m-Phenylenediamine are industrial manufacturers and licensed distributors, supplied against documented end use.
Meta-aramid polymerisation.
Aromatic hardeners.
Colorant intermediates.
Adhesion and resin systems.
Verified Dubai and Sharjah traders re-exporting within the rules of each destination.
Synthesis labs needing small lots with full documentation.
Campaign-based production for global brands.
Verified importers in the GCC, Africa and South Asia, subject to import rules.
We supply m-Phenylenediamine to industrial areas, ports and free zones throughout the UAE, with re-export to the wider GCC and beyond.
Fast local delivery to aramid-fibre, epoxy, dye, rubber and specialty-polymer manufacturers in Dubai, plus re-export via Jebel Ali Port.
Supply to aramid-fibre, epoxy, dye, rubber and specialty-polymer manufacturers in Musaffah, KEZAD and around Khalifa Port.
Serving aramid-fibre, epoxy, dye, rubber and specialty-polymer manufacturers across Sharjah's industrial areas and free zones.
Reliable deliveries for Ajman-based aramid-fibre, epoxy, dye, rubber and specialty-polymer manufacturers from our UAE stock and import programme.
Supplying aramid-fibre, epoxy, dye, rubber and specialty-polymer manufacturers in RAK's free zones and ports.
Road delivery to the east coast with access to Port of Fujairah for regional shipments.
Consolidated with our northern Emirates deliveries for factories and traders.
Export from the UAE on EXW, FOB, CFR, CIF, DAP or DDP terms.
m-Phenylenediamine darkens quickly in air and light and is toxic, so we ship flakes and crystals in sealed, lined drums or bags, flushed or well sealed, with toxic-substance labelling, planned to stay clean through UAE summer transit.
Whether you need a few drums for a pilot batch or regular bulk loads for continuous production, we plan packing, labelling, documentation and transport from port or warehouse to your gate.
Sealed lined steel or HDPE drums, as per grade.
Moisture-protected bags and sealed trial packs.
Stretch-wrapped pallets for regular supply.
EXW UAE, FOB Jebel Ali / Khalifa, CFR, CIF, DAP, DDP.
A simple, transparent procurement process built for busy purchase teams.
Send product name, CAS 108-45-2, assay, colour limit, form and packing, quantity, packing and delivery Emirate.
We match approved makers and send a quotation with packing, Incoterm and lead time.
COA, SDS and TDS shared upfront, with m-Phenylenediamine samples available for qualification.
We lock in the batch, arrange sealed packing and GHS labelling.
Customs clearance, regulatory and transport documentation and transport from port or warehouse.
Delivery to your site in the UAE or GCC, plus repeat-order planning.
Every lot of m-Phenylenediamine we supply is traceable to its manufacturer and production date. We check assay, moisture and o- and p-isomers, nitroaniline and water against your requirement before dispatch. Supply is subject to end-use confirmation and the documentation required by UAE and destination-country rules.
Hazardous. m-Phenylenediamine is toxic if swallowed and harmful in contact with skin, may cause an allergic skin reaction, causes serious eye irritation, is suspected of causing genetic defects and is very toxic to aquatic life with long-lasting effects. Classification varies by supplier, so always refer to the supplied SDS for the full classification and transport details.
Approved makers and end-use checks suited to a regulated aromatic amine.
Hazard labelling, SDS and transport documents are prepared for every consignment.
Clear quotes with grade, packing, Incoterm and lead time so your purchase team can decide quickly.
COA, SDS, TDS, COO and DG paperwork ready for audits, customs and GCC export.
Delivery of m-Phenylenediamine across the seven Emirates and export to Saudi Arabia, Oman, Qatar, Kuwait and Bahrain.
From sample and trial lots to annual supply contracts and bulk programmes.
Common questions from UAE and GCC buyers about m-Phenylenediamine supply, specifications and delivery.
m-Phenylenediamine is used as a monomer for meta-aramid fibres, as an epoxy curing agent, as an intermediate for azo and sulphur dyes, in rubber-to-fabric adhesion systems, in polyurethane and polyamide resins and as a reagent.
The CAS number of m-Phenylenediamine is 108-45-2. Its molecular formula is C₆H₄(NH₂)₂ and its molecular weight is 108.14 g/mol.
m-Phenylenediamine (CAS 108-45-2) is also sold as mPDA, MPD, 1,3-diaminobenzene, benzene-1,3-diamine, 1,3-phenylenediamine, m-diaminobenzene. Please mention the CAS number in your enquiry so we quote the right material.
Chelora Chemicals UAE is a B2B chemical supplier and distributor of m-Phenylenediamine, serving Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with full COA, SDS and TDS documentation and export to the wider GCC.
Yes. We deliver to all seven Emirates, including Jebel Ali and JAFZA in Dubai, KEZAD, Musaffah and Khalifa Port in Abu Dhabi, and SAIF Zone and Hamriyah Free Zone in Sharjah, as well as RAKEZ, Ajman Free Zone and Fujairah.
We supply m-Phenylenediamine as flakes and crystals with an assay of 99% or higher, with higher-purity polymer grades on request, as per COA. Please state the assay, colour limit, form and your intended end use.
m-Phenylenediamine (CAS 108-45-2) has its amino groups in the 1,3 positions. It is different from o-phenylenediamine (CAS 95-54-5), from p-phenylenediamine (CAS 106-50-3), from 2,4-toluenediamine (CAS 95-80-7, with a methyl group) and from aniline. Please quote the CAS number.
Share the assay, colour limit, form and packing, quantity, packing, Incoterm and delivery Emirate through our contact page and our team aims to respond within one business day.
Typically 25 kg lined drums or bags, with smaller sealed packs for trials. Packs are sealed against moisture and air and labelled for toxic-substance transport as per the SDS.
The minimum order depends on packing and current stock. We handle everything from a few drums or small packs for trials and lab qualification up to full container loads.
Store in tightly closed containers in a cool, dry, well-ventilated place, protected from light and away from oxidisers, acids and nitrating agents. Reseal opened packs promptly because the product darkens in air.
Yes. m-Phenylenediamine is toxic if swallowed, harmful in contact with skin, a skin sensitiser, an eye irritant, a suspected mutagen and very toxic to aquatic life. Use closed systems, protective clothing, gloves and eye protection, and follow the SDS.
Yes. We export from the UAE to Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, East and West Africa, South Asia and other markets on EXW, FOB, CFR, CIF, DAP or DDP terms, subject to the import rules of each destination.
Yes. Samples are available for qualification on request, together with the COA and SDS, so your QC or R&D team can approve the material before a commercial order.
Meta-aramid is made by a step-growth reaction with isophthaloyl chloride, where exact balance and very low monofunctional or isomer impurities decide polymer chain length and fibre strength. That is why polymer users specify high purity and low colour.
Keep it sealed, dry, cool and protected from light, because exposure to air and light darkens it quickly and can lower assay. Reseal opened packs promptly and use stocks in rotation.
Tell us your assay, colour limit, form and packing, quantity, packing and delivery Emirate, and get a quote for m-Phenylenediamine from a trusted chemical supplier in the UAE.