Marhaba · مرحباً
Chemical supply across all 7 Emirates التوريد إلى الإمارات السبع COA, SDS & TDS with every order مستندات كاملة مع كل طلب Jebel Ali · KEZAD · SAIF Zone · Hamriyah · RAKEZ Small lots to full container loads من العينات حتى الحاويات الكاملة

Petrochemicals

Olefins, aromatics, refinery streams, polymers, rubbers, solvents, plasticizers, acids, reagents & inorganics for GCC and global buyers.

Dyes

Diazo components, nitroanilines, nitrobenzenes and chloro/fluoro aromatics for azo dyes, lake pigments and inks.

Amines

Anilines, toluidines, anisidines, phenylenediamines, aliphatic, cyclic, fatty and ethylene amines plus alkanolamines.

    No exact match — we source specialty chemicals on request.

    Ask for this product

    Can’t find your chemical? Sourced on request with COA & SDS, delivered across all 7 Emirates & the GCC.

    4,4′-Methylenedianiline (MDA) UAE | CAS 101-77-9 | Chelora
    Trusted 4,4′-Methylenedianiline (MDA) Supplier across all 7 Emirates
    Aromatic Amines

    4,4′-Methylenedianiline (MDA)
    Supplier in Dubai & UAE

    Chelora Chemicals UAE supplies 4,4′-Methylenedianiline (MDA) (CAS 101-77-9) as flakes and granules to polyurethane, epoxy, polyimide and specialty-polymer manufacturers across Dubai, Abu Dhabi, Sharjah and all seven Emirates, against documented end use, with batch-wise COA, sealed packing and compliant delivery.

    CAS101-77-9FormulaCH₂(C₆H₄NH₂)₂M.W.198.26 g/molGrade99% min

    Molecular Structure

    CH₂(C₆H₄NH₂)₂ ✦
    NH₂NH₂CH₂(C₆H₄NH₂)₂ · aromatic diamine
    FlakesPhysical state
    Melts ~90 °CMelting point
    DiamineTwo amino groups
    7Emirates with delivery
    6GCC export markets
    ≥ 99%Typical assay, confirmed on COA
    24hQuote response target
    Product Overview

    What is 4,4′-Methylenedianiline (MDA)?

    4,4′-Methylenedianiline (MDA, 4,4′-diaminodiphenylmethane, DDM) is an aromatic diamine in which two aminophenyl rings are joined by a methylene bridge, a tan to light brown crystalline solid supplied as flakes or granules. It is only slightly soluble in water and dissolves in ethanol and many organic solvents.

    Its main use is as the intermediate for MDI (methylene diphenyl diisocyanate) in polyurethanes. It is also used as a curing agent for epoxy resins, a monomer for polyimides and bismaleimides, a chain extender in specialty polyurethanes and an intermediate for dyes and high-performance composites.

    As an established chemical supplier in the UAE, Chelora Chemicals sources 4,4′-Methylenedianiline (MDA) from approved manufacturers with consistent assay and low levels of 2,4′-isomer, aniline and water, and delivers it to customers in Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, as well as export customers in Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, Africa and South Asia.

    • 99% minimum flakes and granules, with other grades on request
    • Grades matched to your process
    • COA, SDS and TDS shared before dispatch
    • Sealed drums, bags and small packs, as per grade
    • Supply via Jebel Ali, Khalifa Port, Hamriyah and Sharjah, with regulatory paperwork handled
    Technical Data

    4,4′-Methylenedianiline (MDA) specifications & properties

    Typical specification and physical data for 4,4′-Methylenedianiline (MDA) supplied in the UAE. Limits depend on the grade, and batch-specific values are always confirmed on the Certificate of Analysis.

    Typical Specification

    ParameterSpecification
    AppearanceTan to light brown flakes, crystals or granules
    AssayNot less than 99.0% (typical)
    2,4′-Isomer & anilineAs per COA / customer requirement
    Water (Karl Fischer)Not more than 0.3% (typical)
    Density (20 °C)Approx. 1.15 g/cm³
    Boiling pointApprox. 398 – 399 °C
    GradeTechnical / synthesis grade, as per COA
    Packing & documentsDrums, IBCs, ISO tanks; COA, SDS, TDS, COO

    Physical & Chemical Properties

    PropertyValue
    Chemical name4,4′-Methylenedianiline
    CAS number101-77-9
    Molecular formulaCH₂(C₆H₄NH₂)₂
    Molecular weight198.26 g/mol
    Physical state (20 °C)Crystalline solid
    Melting / boiling point89 – 91 °C / Approx. 398 – 399 °C
    SolubilitySlightly soluble in water; soluble in ethanol, ether and benzene
    SensitivityDarkens in light and air; toxic; regulated as a substance of concern in some markets; keep sealed and dry

    Values are typical literature data for reference only and do not form a sales specification. Contact us for the latest TDS and batch COA.

    Need a specific assay, isomer limit or form for epoxy-curing or polymer use? We match your spec to approved makers, against documented end use.

    Share Your Specification →
    Applications

    Where 4,4′-Methylenedianiline (MDA) is used

    From polyurethane intermediates to high-temperature epoxy and polyimide systems, MDA is a specialist aromatic diamine for industrial polymer makers in the UAE and GCC.

    MDI Intermediate

    Phosgenated in integrated plants to make MDI for polyurethane foams, elastomers and adhesives.

    Epoxy Curing Agent

    Hardens epoxy resins for high-temperature composites, tooling and electrical parts.

    Polyimides & Bismaleimides

    A diamine monomer for heat-resistant films, laminates and composites.

    Specialty Polyurethanes

    A chain extender and crosslinker in selected elastomer systems.

    Dye Intermediates

    Used in selected colorant chemistry.

    Research & Fine Chemicals

    Used in laboratory polymer and ligand synthesis.

    Industries We Serve

    Supplying 4,4′-Methylenedianiline (MDA) to UAE & GCC industry

    Our UAE customers for 4,4′-Methylenedianiline (MDA) are industrial manufacturers and licensed distributors, supplied against documented end use.

    01

    Isocyanate & Polyurethane Producers

    MDI value chains.

    02

    Epoxy Formulators & Composite Makers

    High-temperature hardeners.

    03

    Polyimide & Specialty-Polymer Makers

    Diamine monomers.

    04

    Dye & Fine-Chemical Producers

    Intermediate routes.

    05

    Chemical Traders & Distributors

    Verified Dubai and Sharjah traders re-exporting within the rules of each destination.

    06

    Research & QC Laboratories

    Synthesis labs needing small lots with full documentation.

    07

    Contract & Toll Manufacturers

    Campaign-based production for global brands.

    08

    Export Buyers

    Verified importers in the GCC, Africa and South Asia, subject to import rules.

    UAE Coverage

    4,4′-Methylenedianiline (MDA) delivered across all seven Emirates

    We supply 4,4′-Methylenedianiline (MDA) to industrial areas, ports and free zones throughout the UAE, with re-export to the wider GCC and beyond.

    دبي

    4,4′-Methylenedianiline (MDA) Supplier in Dubai

    Fast local delivery to polyurethane, epoxy, polyimide and specialty-polymer manufacturers in Dubai, plus re-export via Jebel Ali Port.

    Jebel Ali PortJAFZADubai Investments ParkAl QuozDubai Industrial CityRas Al Khor
    أبوظبي

    4,4′-Methylenedianiline (MDA) Supplier in Abu Dhabi

    Supply to polyurethane, epoxy, polyimide and specialty-polymer manufacturers in Musaffah, KEZAD and around Khalifa Port.

    Khalifa PortKEZADMusaffah / ICADAl AinRuwais
    الشارقة

    4,4′-Methylenedianiline (MDA) Supplier in Sharjah

    Serving polyurethane, epoxy, polyimide and specialty-polymer manufacturers across Sharjah's industrial areas and free zones.

    SAIF ZoneHamriyah Free ZoneSharjah Industrial AreasPort Khalid
    عجمان

    4,4′-Methylenedianiline (MDA) Supplier in Ajman

    Reliable deliveries for Ajman-based polyurethane, epoxy, polyimide and specialty-polymer manufacturers from our UAE stock and import programme.

    Ajman Free ZoneNew Industrial AreaAjman Port
    رأس الخيمة

    4,4′-Methylenedianiline (MDA) Supplier in Ras Al Khaimah

    Supplying polyurethane, epoxy, polyimide and specialty-polymer manufacturers in RAK's free zones and ports.

    RAKEZSaqr PortAl Hamra Industrial Zone
    الفجيرة

    4,4′-Methylenedianiline (MDA) Supplier in Fujairah

    Road delivery to the east coast with access to Port of Fujairah for regional shipments.

    Port of FujairahFujairah Free ZoneDibba
    أم القيوين

    4,4′-Methylenedianiline (MDA) Supplier in Umm Al Quwain

    Consolidated with our northern Emirates deliveries for factories and traders.

    UAQ Free Trade ZoneUAQ Industrial Area
    الخليج

    GCC & International Export

    Export from the UAE on EXW, FOB, CFR, CIF, DAP or DDP terms.

    Saudi ArabiaOmanQatarKuwaitBahrainAfricaSouth Asia
    Packaging & Logistics

    Packed for a toxic, light-sensitive solid

    MDA darkens in light and air and is toxic, so we ship it in sealed, lined drums or bags with toxic-substance labelling, planned to stay dry and protected through UAE summer transit.

    Whether you need a few drums for a pilot batch or regular bulk loads for continuous production, we plan packing, labelling, documentation and transport from port or warehouse to your gate.

    Drums

    Sealed lined steel or HDPE drums, as per grade.

    Lined Bags & Small Packs

    Moisture-protected bags and sealed trial packs.

    Palletised Loads

    Stretch-wrapped pallets for regular supply.

    Incoterms

    EXW UAE, FOB Jebel Ali / Khalifa, CFR, CIF, DAP, DDP.

    How to Buy

    Buying 4,4′-Methylenedianiline (MDA) in the UAE, step by step

    A simple, transparent procurement process built for busy purchase teams.

    Share Your Requirement

    Send product name, CAS 101-77-9, assay, form and packing, quantity, packing and delivery Emirate.

    Specs & Quotation

    We match approved makers and send a quotation with packing, Incoterm and lead time.

    Samples & Documents

    COA, SDS and TDS shared upfront, with 4,4′-Methylenedianiline (MDA) samples available for qualification.

    Order Confirmation

    We lock in the batch, arrange sealed packing and GHS labelling.

    Customs & Logistics

    Customs clearance, regulatory and transport documentation and transport from port or warehouse.

    Delivery & Support

    Delivery to your site in the UAE or GCC, plus repeat-order planning.

    Quality & Compliance

    Documented quality on every batch

    Every lot of 4,4′-Methylenedianiline we supply is traceable to its manufacturer and production date. We check assay, isomer content and moisture against your requirement before dispatch. MDA is regulated as a substance of concern in some markets, so supply is made only against documented industrial end use and in line with UAE and destination-country rules.

    COACertificate of Analysis per batch
    SDSGHS Safety Data Sheet
    TDSTechnical Data Sheet
    COOCertificate of Origin
    GHSHazard labelling & DG docs
    LotFull batch traceability
    Safe Handling

    Storage & handling guidance

    Hazardous. 4,4′-Methylenedianiline is toxic if swallowed, may cause an allergic skin reaction, is suspected of causing genetic defects, may cause cancer, can cause damage to the liver and is toxic to aquatic life with long-lasting effects. It is treated as a substance of very high concern in some jurisdictions. Always refer to the supplied SDS for the full classification and transport details.

    • Store in a cool, dry, well-ventilated place, protected from light and air, in tightly closed containers.
    • Keep away from strong oxidisers, strong acids, acid chlorides, isocyanates and nitrating agents.
    • Avoid all skin contact, as aromatic amines can be absorbed through intact skin; wear chemical-resistant gloves, protective clothing and goggles.
    • Use closed transfer and local exhaust ventilation, and an approved respirator where dust, vapour or fume forms.
    • Follow your site's exposure limits, health surveillance and hygiene rules, and keep food and drink out of work areas.
    • Contain spills without raising dust, keep them out of drains and dispose of as hazardous waste per UAE regulations.
    Why Chelora

    Why UAE buyers source 4,4′-Methylenedianiline (MDA) from us

    01

    Documented, Responsible Supply

    Approved makers and end-use checks suited to a regulated aromatic amine.

    02

    Regulatory Paperwork Handled

    Hazard labelling, SDS and transport documents are prepared for every consignment.

    03

    Fast, Clear Quotations

    Clear quotes with grade, packing, Incoterm and lead time so your purchase team can decide quickly.

    04

    Full Documentation

    COA, SDS, TDS, COO and DG paperwork ready for audits, customs and GCC export.

    05

    UAE & GCC Logistics

    Delivery of 4,4′-Methylenedianiline (MDA) across the seven Emirates and export to Saudi Arabia, Oman, Qatar, Kuwait and Bahrain.

    06

    Flexible Volumes

    From sample and trial lots to annual supply contracts and bulk programmes.

    FAQ

    4,4′-Methylenedianiline (MDA) questions answered

    Common questions from UAE and GCC buyers about 4,4′-Methylenedianiline (MDA) supply, specifications and delivery.

    MDA is used as an intermediate for MDI in polyurethanes, as a curing agent for epoxy resins, as a monomer for polyimides and bismaleimides, as a specialty chain extender and in dye and fine-chemical synthesis.

    The CAS number of 4,4′-Methylenedianiline (MDA) is 101-77-9. Its molecular formula is CH₂(C₆H₄NH₂)₂ and its molecular weight is 198.26 g/mol.

    4,4′-Methylenedianiline (MDA) (CAS 101-77-9) is also sold as MDA, 4,4′-diaminodiphenylmethane, DDM, 4,4′-methylenebisbenzenamine, bis(4-aminophenyl)methane, 4,4′-methylenedianiline. Please mention the CAS number in your enquiry so we quote the right material.

    Chelora Chemicals UAE is a B2B chemical supplier and distributor of 4,4′-Methylenedianiline (MDA), serving Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with full COA, SDS and TDS documentation and export to the wider GCC.

    Yes. We deliver to all seven Emirates, including Jebel Ali and JAFZA in Dubai, KEZAD, Musaffah and Khalifa Port in Abu Dhabi, and SAIF Zone and Hamriyah Free Zone in Sharjah, as well as RAKEZ, Ajman Free Zone and Fujairah.

    We supply MDA as flakes and granules with an assay of 99% or higher, as per COA. Please state the assay, isomer limit, form and your intended end use.

    4,4′-MDA (CAS 101-77-9) is the diamine with a methylene bridge between two aminophenyl rings. It is different from MDI (the diisocyanate), from polymeric MDA, from MOCA (CAS 101-14-4, with two chlorine atoms), from 4,4′-oxydianiline and from aniline. Please quote the CAS number.

    Share the assay, form and packing, quantity, packing, Incoterm and delivery Emirate through our contact page and our team aims to respond within one business day.

    Typically 25 kg lined drums or bags, with smaller sealed packs for trials. Packs are sealed against moisture and air and labelled for toxic-substance transport as per the SDS.

    The minimum order depends on packing and current stock. We handle everything from a few drums or small packs for trials and lab qualification up to full container loads.

    Store in tightly closed containers in a cool, dry, well-ventilated place, protected from light and away from oxidisers, acids and nitrating agents. Reseal opened packs promptly because the product darkens in air.

    Yes. MDA is toxic if swallowed, a skin sensitiser, a suspected mutagen and may cause cancer, and it can damage the liver. It is regulated in some markets. Use closed systems, full protective equipment and health surveillance, and follow the SDS.

    Yes. We export from the UAE to Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, East and West Africa, South Asia and other markets on EXW, FOB, CFR, CIF, DAP or DDP terms, subject to the import rules of each destination.

    Yes. Samples are available for qualification on request, together with the COA and SDS, so your QC or R&D team can approve the material before a commercial order.

    In several jurisdictions MDA is listed as a substance of very high concern or subject to authorisation, and in many places occupational exposure is tightly limited. We supply only against documented industrial end use and in line with UAE and destination-country rules, so please share your company and application details with the enquiry.

    Its rigid aromatic structure gives cured epoxy a high glass-transition temperature and good chemical and thermal resistance, which suits composites, tooling and electrical insulation. Where handling rules or substitutes apply, buyers also compare it against other aromatic and cycloaliphatic hardeners.

    Let's Talk Chemistry

    Need 4,4′-Methylenedianiline (MDA) in Dubai, Abu Dhabi or Sharjah?

    Tell us your assay, form and packing, quantity, packing and delivery Emirate, and get a quote for 4,4′-Methylenedianiline (MDA) from a trusted chemical supplier in the UAE.

    4,4′-Methylenedianiline (MDA) supplier UAE4,4′-Methylenedianiline (MDA) DubaiCAS 101-77-94,4′-Methylenedianiline (MDA) Abu Dhabi4,4′-Methylenedianiline (MDA) Sharjah4,4'-methylenedianiline supplier UAEMDA supplier Dubai4,4'-diaminodiphenylmethane UAEMDA epoxy hardener UAEMDA polyimide UAEMDI raw material UAE4,4′-Methylenedianiline (MDA) Ajman4,4′-Methylenedianiline (MDA) Ras Al Khaimah4,4′-Methylenedianiline (MDA) Fujairahbuy 4,4′-Methylenedianiline (MDA) UAEbulk 4,4′-Methylenedianiline (MDA) GCC4,4′-Methylenedianiline (MDA) exporter UAE4,4′-Methylenedianiline (MDA) distributor Dubai4,4′-Methylenedianiline (MDA) supplier Jebel Ali