Marhaba · مرحباً
Chemical supply across all 7 Emirates التوريد إلى الإمارات السبع COA, SDS & TDS with every order مستندات كاملة مع كل طلب Jebel Ali · KEZAD · SAIF Zone · Hamriyah · RAKEZ Small lots to full container loads من العينات حتى الحاويات الكاملة

Petrochemicals

Olefins, aromatics, refinery streams, polymers, rubbers, solvents, plasticizers, acids, reagents & inorganics for GCC and global buyers.

Dyes

Diazo components, nitroanilines, nitrobenzenes and chloro/fluoro aromatics for azo dyes, lake pigments and inks.

Amines

Anilines, toluidines, anisidines, phenylenediamines, aliphatic, cyclic, fatty and ethylene amines plus alkanolamines.

    No exact match — we source specialty chemicals on request.

    Ask for this product

    Can’t find your chemical? Sourced on request with COA & SDS, delivered across all 7 Emirates & the GCC.

    ABS Resin Supplier UAE | ABS Granules | Chelora Chemicals
    Trusted ABS Resin Supplier across all 7 Emirates
    Polymers & Resins

    ABS Resin
    Supplier in Dubai & UAE

    Chelora Chemicals UAE supplies ABS Resin (CAS 9003-56-9) as general-purpose, high-impact, extrusion, plating and flame-retardant granules to injection-moulding, sheet-extrusion, appliance, automotive and pipe-fitting manufacturers across Dubai, Abu Dhabi, Sharjah and all seven Emirates, with batch-wise COA, sealed moisture-protected packing and fast GCC delivery.

    CAS9003-56-9Formula(C₈H₈·C₄H₆·C₃H₃N)nM.W.Copolymer (grade-dependent)GradeGeneral / FR / plating

    Molecular Structure

    (C₈H₈·C₄H₆·C₃H₃N)n ✦
    CNxzyABS · acrylonitrile, butadiene, styrene
    GranulesPhysical state
    1.04 g/cm³Density
    HDT ~95 °CHeat deflection
    7Emirates with delivery
    6GCC export markets
    MFR 1 – 40g/10 min, by grade
    24hQuote response target
    Product Overview

    What is ABS Resin?

    ABS resin (acrylonitrile butadiene styrene) is a tough, glossy engineering thermoplastic made of a styrene-acrylonitrile matrix toughened with butadiene rubber particles, supplied as natural, black or coloured granules. It balances impact strength, stiffness, surface finish and easy processing.

    It is used for appliance housings, automotive interior and trim parts, electronic enclosures, pipe and fittings, sanitary and luggage shells, toys and consumer goods, extruded sheet for thermoforming and 3D-printing filament. Grades vary by melt flow, impact level, heat resistance, flame rating and plating suitability.

    As an established chemical supplier in the UAE, Chelora Chemicals sources ABS Resin from approved manufacturers with consistent assay and low levels of melt flow rate, impact strength, colour and moisture, and delivers it to customers in Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, as well as export customers in Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, Africa and South Asia.

    • General-purpose, high-impact, extrusion, plating and flame-retardant grades
    • Melt flow or viscosity and colour matched to your process
    • COA, SDS and TDS shared before dispatch
    • 25 kg bags, jumbo bags and full-container loads
    • Supply via Jebel Ali, Khalifa Port, Hamriyah and Sharjah
    Technical Data

    ABS Resin specifications & properties

    Typical specification and physical data for ABS Resin supplied in the UAE. Limits depend on the grade, and batch-specific values are always confirmed on the Certificate of Analysis.

    Typical Specification

    ParameterSpecification
    AppearanceNatural, black or coloured opaque granules
    Melt flow rate (220 °C / 10 kg)1 – 40 g/10 min, by grade
    DensityApprox. 1.03 – 1.07 g/cm³
    Notched Izod impact (23 °C)Approx. 100 – 400 J/m, by grade
    Heat deflection temperature (1.8 MPa)Approx. 80 – 105 °C, by grade
    Tensile strengthApprox. 35 – 50 MPa
    Moisture before mouldingNot more than 0.1% (dry about 2 – 4 h at 80 °C)
    Packing & documents25 kg bags, jumbo bags; COA, SDS, TDS, COO

    Physical & Chemical Properties

    PropertyValue
    Chemical nameAcrylonitrile butadiene styrene copolymer
    CAS number9003-56-9
    Typical compositionAbout 15 – 35% acrylonitrile, 5 – 30% butadiene, 40 – 60% styrene
    Molecular weightCopolymer (grade-dependent)
    Physical state (20 °C)Solid granules
    Glass transition / processingTg of matrix approx. 105 °C; processed at about 200 – 260 °C
    SolubilityInsoluble in water; swells or dissolves in acetone, MEK and esters
    SensitivitySlightly hygroscopic; yellows and loses toughness under UV; dry before processing

    Values are typical literature data for reference only and do not form a sales specification. Contact us for the latest TDS and batch COA.

    Need a specific melt flow, impact level, flame rating or plating grade? We match your spec to approved producers.

    Share Your Specification →
    Applications

    Where ABS Resin is used

    From appliance housings to pipe fittings and 3D-printing filament, ABS is an all-round engineering plastic for converters in the UAE and GCC.

    Appliances & Consumer Goods

    Housings, panels, luggage and toys needing gloss and impact strength.

    Automotive Interiors

    Dashboards, trim, consoles and plated parts.

    Electronics Enclosures

    Flame-retardant grades for meters, chargers and housings.

    Pipe & Fittings

    Extrusion and moulding grades for pressure-free and drainage fittings.

    Sanitary & Sheet

    Sheet grades for thermoformed baths, liners and luggage.

    3D-Printing Filament

    Filament grades for desktop and industrial printers.

    Industries We Serve

    Supplying ABS Resin to UAE & GCC industry

    Our UAE customers for ABS Resin are industrial manufacturers and licensed distributors, supplied against documented end use.

    01

    Injection Moulders

    Appliance, automotive and consumer parts.

    02

    Sheet & Profile Extruders

    Thermoforming and pipe lines.

    03

    Electrical & Electronics Manufacturers

    Enclosures and housings.

    04

    Compounders & Blenders

    PC/ABS alloys and coloured compounds.

    05

    Chemical Traders & Distributors

    Verified Dubai and Sharjah traders re-exporting within the rules of each destination.

    06

    Research & QC Laboratories

    Synthesis labs needing small lots with full documentation.

    07

    Contract & Toll Manufacturers

    Campaign-based production for global brands.

    08

    Export Buyers

    Verified importers in the GCC, Africa and South Asia, subject to import rules.

    UAE Coverage

    ABS Resin delivered across all seven Emirates

    We supply ABS Resin to industrial areas, ports and free zones throughout the UAE, with re-export to the wider GCC and beyond.

    دبي

    ABS Resin Supplier in Dubai

    Fast local delivery to injection-moulding, sheet-extrusion, appliance, automotive and pipe-fitting manufacturers in Dubai, plus re-export via Jebel Ali Port.

    Jebel Ali PortJAFZADubai Investments ParkAl QuozDubai Industrial CityRas Al Khor
    أبوظبي

    ABS Resin Supplier in Abu Dhabi

    Supply to injection-moulding, sheet-extrusion, appliance, automotive and pipe-fitting manufacturers in Musaffah, KEZAD and around Khalifa Port.

    Khalifa PortKEZADMusaffah / ICADAl AinRuwais
    الشارقة

    ABS Resin Supplier in Sharjah

    Serving injection-moulding, sheet-extrusion, appliance, automotive and pipe-fitting manufacturers across Sharjah's industrial areas and free zones.

    SAIF ZoneHamriyah Free ZoneSharjah Industrial AreasPort Khalid
    عجمان

    ABS Resin Supplier in Ajman

    Reliable deliveries for Ajman-based injection-moulding, sheet-extrusion, appliance, automotive and pipe-fitting manufacturers from our UAE stock and import programme.

    Ajman Free ZoneNew Industrial AreaAjman Port
    رأس الخيمة

    ABS Resin Supplier in Ras Al Khaimah

    Supplying injection-moulding, sheet-extrusion, appliance, automotive and pipe-fitting manufacturers in RAK's free zones and ports.

    RAKEZSaqr PortAl Hamra Industrial Zone
    الفجيرة

    ABS Resin Supplier in Fujairah

    Road delivery to the east coast with access to Port of Fujairah for regional shipments.

    Port of FujairahFujairah Free ZoneDibba
    أم القيوين

    ABS Resin Supplier in Umm Al Quwain

    Consolidated with our northern Emirates deliveries for factories and traders.

    UAQ Free Trade ZoneUAQ Industrial Area
    الخليج

    GCC & International Export

    Export from the UAE on EXW, FOB, CFR, CIF, DAP or DDP terms.

    Saudi ArabiaOmanQatarKuwaitBahrainAfricaSouth Asia
    Packaging & Logistics

    Packed to protect gloss and dryness

    ABS takes up moisture that causes streaks and surface defects when moulded wet, so we ship granules in sealed, moisture-protected bags and bulk packs that keep the resin clean and dry through UAE summer humidity.

    Whether you need a few drums for a pilot batch or regular bulk loads for continuous production, we plan packing, labelling, documentation and transport from port or warehouse to your gate.

    25 kg Bags

    Moisture-protected PE-lined bags on stretch-wrapped pallets.

    Jumbo Bags & Octabins

    About 1,000 kg bulk bags for high-volume users.

    Container Loads

    20 ft and 40 ft full-container loads via Jebel Ali.

    Incoterms

    EXW UAE, FOB Jebel Ali / Khalifa, CFR, CIF, DAP, DDP.

    How to Buy

    Buying ABS Resin in the UAE, step by step

    A simple, transparent procurement process built for busy purchase teams.

    Share Your Requirement

    Send product name, CAS 9003-56-9, grade (general, high-impact, extrusion, plating or FR), melt flow and packing, quantity, packing and delivery Emirate.

    Specs & Quotation

    We match approved makers and send a quotation with packing, Incoterm and lead time.

    Samples & Documents

    COA, SDS and TDS shared upfront, with ABS Resin samples available for qualification.

    Order Confirmation

    We lock in the batch, arrange sealed packing and GHS labelling.

    Customs & Logistics

    Customs clearance, documentation and shipping and transport from port or warehouse.

    Delivery & Support

    Delivery to your site in the UAE or GCC, plus repeat-order planning.

    Quality & Compliance

    Documented quality on every batch

    Every lot of ABS Resin we supply is traceable to its manufacturer and production date. We check melt flow rate, impact strength, colour and moisture against your requirement before dispatch so your moulding, extrusion or spinning line is not put at risk by off-spec material.

    COACertificate of Analysis per batch
    SDSGHS Safety Data Sheet
    TDSTechnical Data Sheet
    COOCertificate of Origin
    GHSHazard labelling & DG docs
    LotFull batch traceability
    Safe Handling

    Storage & handling guidance

    Not classified as hazardous as supplied. ABS resin is a low-hazard polymer, but fine dust can form combustible dust clouds, and molten polymer causes burns and can release irritating fumes. Always refer to the supplied SDS for the full classification and handling details.

    • Store in a cool, dry, well-ventilated area, away from direct sun and heat.
    • Keep bags sealed until use; polymer chips and granules absorb moisture and must be dried before processing.
    • Keep away from strong oxidisers and ignition sources; fine dust can form combustible dust clouds.
    • Wear gloves and safety glasses, and heat-resistant protection when handling molten polymer.
    • Provide fume extraction at processing temperatures, as hot polymer can release irritating vapours.
    • Sweep up spilt granules at once to avoid slips, and recycle or dispose of as per UAE regulations.
    Why Chelora

    Why UAE buyers source ABS Resin from us

    01

    Grades Matched to Your Process

    Melt flow or viscosity, colour and additive package agreed up front with approved producers.

    02

    Consistent, Traceable Lots

    Batch-wise COA and lot traceability from producer to your plant.

    03

    Fast, Clear Quotations

    Clear quotes with grade, packing, Incoterm and lead time so your purchase team can decide quickly.

    04

    Full Documentation

    COA, SDS, TDS, COO and DG paperwork ready for audits, customs and GCC export.

    05

    UAE & GCC Logistics

    Delivery of ABS Resin across the seven Emirates and export to Saudi Arabia, Oman, Qatar, Kuwait and Bahrain.

    06

    Flexible Volumes

    From sample and trial lots to annual supply contracts and bulk programmes.

    FAQ

    ABS Resin questions answered

    Common questions from UAE and GCC buyers about ABS Resin supply, specifications and delivery.

    ABS resin is used for appliance housings, automotive interior parts, electronic enclosures, pipe and fittings, sanitary and luggage shells, toys, extruded sheet for thermoforming and 3D-printing filament.

    The CAS number of ABS Resin is 9003-56-9. Its molecular formula is (C₈H₈·C₄H₆·C₃H₃N)n and its molecular weight is Copolymer (grade-dependent).

    ABS Resin (CAS 9003-56-9) is also sold as ABS, ABS plastic, ABS granules, acrylonitrile-butadiene-styrene, ABS pellets, ABS copolymer. Please mention the CAS number in your enquiry so we quote the right material.

    Chelora Chemicals UAE is a B2B chemical supplier and distributor of ABS Resin, serving Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with full COA, SDS and TDS documentation and export to the wider GCC.

    Yes. We deliver to all seven Emirates, including Jebel Ali and JAFZA in Dubai, KEZAD, Musaffah and Khalifa Port in Abu Dhabi, and SAIF Zone and Hamriyah Free Zone in Sharjah, as well as RAKEZ, Ajman Free Zone and Fujairah.

    We supply ABS resin as general-purpose, high-impact, extrusion, plating, heat-resistant and flame-retardant granules, with melt flow and impact strength confirmed on the COA. Please state the grade, melt flow, colour and your intended end use.

    ABS (CAS 9003-56-9) is the acrylonitrile-butadiene-styrene terpolymer. It is different from SAN, from ASA, from HIPS (impact polystyrene) and from PC/ABS alloys. Please quote the grade and CAS number.

    Share the grade (general, high-impact, extrusion, plating or FR), melt flow and packing, quantity, packing, Incoterm and delivery Emirate through our contact page and our team aims to respond within one business day.

    Typically 25 kg moisture-protected bags on pallets, with jumbo bags and octabins for large users, and full 20 ft or 40 ft container loads for regular supply.

    The minimum order depends on packing and current stock. We handle everything from a few drums or small packs for trials and lab qualification up to full container loads.

    Store sealed bags indoors in a cool, dry, well-ventilated area away from direct sun, heat and ignition sources. Reseal opened bags promptly and dry the resin before processing.

    ABS Resin pellets are generally not classified as hazardous for transport, but fine dust can form combustible dust clouds and molten polymer causes severe burns. Process with ventilation and follow the SDS supplied with the grade.

    Yes. We export from the UAE to Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, East and West Africa, South Asia and other markets on EXW, FOB, CFR, CIF, DAP or DDP terms, subject to the import rules of each destination.

    Yes. Samples are available for qualification on request, together with the COA and SDS, so your QC or R&D team can approve the material before a commercial order.

    Acrylonitrile adds chemical resistance and heat stability, butadiene rubber adds toughness and impact strength, and styrene gives rigidity, gloss and easy processing. Changing the ratio and rubber particle size gives grades from high-gloss to high-impact.

    It contains a controlled rubber phase that can be etched in chromic or other etch baths to leave a micro-roughened surface, so metal layers adhere strongly. It is used for decorative chrome-plated parts such as trim and fittings.

    Let's Talk Chemistry

    Need ABS Resin in Dubai, Abu Dhabi or Sharjah?

    Tell us your grade (general, high-impact, extrusion, plating or FR), melt flow and packing, quantity, packing and delivery Emirate, and get a quote for ABS Resin from a trusted chemical supplier in the UAE.

    ABS Resin supplier UAEABS Resin DubaiCAS 9003-56-9ABS Resin Abu DhabiABS Resin SharjahABS resin supplier UAEABS granules Dubaiacrylonitrile butadiene styrene UAEinjection moulding ABS UAEflame retardant ABS UAEABS pellets supplier GCCABS Resin AjmanABS Resin Ras Al KhaimahABS Resin Fujairahbuy ABS Resin UAEbulk ABS Resin GCCABS Resin exporter UAEABS Resin distributor DubaiABS Resin supplier Jebel Ali