Gas Treating
Absorbs CO₂ and H₂S in natural-gas and refinery amine units.
Olefins, aromatics, refinery streams, polymers, rubbers, solvents, plasticizers, acids, reagents & inorganics for GCC and global buyers.
Excipients, vitamins and API intermediates for formulation and synthesis.
Aniline, fluoro and specialty building blocks for herbicide, fungicide and insecticide technicals.
Diazo components, nitroanilines, nitrobenzenes and chloro/fluoro aromatics for azo dyes, lake pigments and inks.
Anilines, toluidines, anisidines, phenylenediamines, aliphatic, cyclic, fatty and ethylene amines plus alkanolamines.
No exact match — we source specialty chemicals on request.
Ask for this productCan’t find your chemical? Sourced on request with COA & SDS, delivered across all 7 Emirates & the GCC.
Chelora Chemicals UAE supplies Monoethanolamine (MEA) (CAS 141-43-5) as 99% pure and 85% aqueous grades to gas-treating, surfactant, metalworking-fluid, detergent and cement manufacturers across Dubai, Abu Dhabi, Sharjah and all seven Emirates, with batch-wise COA, sealed packing and fast GCC delivery.
Monoethanolamine (MEA, 2-aminoethanol) is the simplest alkanolamine, with both a primary amine and a primary alcohol group. It is a clear, viscous, colourless liquid with a mild ammonia-like odour that mixes freely with water.
It is widely used to remove CO₂ and H₂S from gas streams, to make surfactants and soaps, in metalworking fluids, detergents and cleaners, personal-care products, cement grinding and as an intermediate for agrochemicals and pharmaceuticals.
As an established chemical supplier in the UAE, Chelora Chemicals sources Monoethanolamine (MEA) from approved manufacturers with consistent assay and low levels of diethanolamine, triethanolamine and water, and delivers it to customers in Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, as well as export customers in Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, Africa and South Asia.
Typical specification and physical data for Monoethanolamine (MEA) supplied in the UAE. Limits depend on the grade, and batch-specific values are always confirmed on the Certificate of Analysis.
| Parameter | Specification |
|---|---|
| Appearance | Clear, colourless, viscous liquid |
| Assay | Not less than 99.0% (99% grade); 85% w/w (solution grade) |
| Diethanolamine & triethanolamine | As per COA / customer requirement |
| Water (Karl Fischer) | Not more than 0.5% (99% grade) |
| Density (20 °C) | Approx. 1.01 g/mL |
| Boiling point | Approx. 170 °C |
| Grade | Technical / synthesis grade, as per COA |
| Packing & documents | Drums, IBCs, ISO tanks; COA, SDS, TDS, COO |
| Property | Value |
|---|---|
| Chemical name | 2-Aminoethanol |
| CAS number | 141-43-5 |
| Molecular formula | HOCH₂CH₂NH₂ |
| Molecular weight | 61.08 g/mol |
| Physical state (20 °C) | Viscous liquid (may solidify below about 10 °C) |
| Melting / boiling point | 10.3 °C / Approx. 170 °C |
| Solubility | Miscible with water and ethanol; soluble in many polar solvents |
| Sensitivity | Hygroscopic; absorbs CO₂ from air; solidifies near 10 °C; corrosive to copper, zinc and aluminium alloys |
Values are typical literature data for reference only and do not form a sales specification. Contact us for the latest TDS and batch COA.
Need a specific grade, colour (APHA) or a low DEA and TEA limit? We match your spec to approved makers.
Share Your Specification →From gas sweetening to detergents, MEA is a high-volume alkanolamine for process and formulation industries in the UAE and GCC.
Absorbs CO₂ and H₂S in natural-gas and refinery amine units.
Reacts with fatty acids to make ethanolamine soaps and amides.
Provides alkalinity and corrosion protection in coolants.
A neutraliser and buffer in cleaners and cosmetics.
Used in grinding-aid blends for cement mills.
A building block for ethyleneimine, agrochemicals and pharmaceuticals.
Our UAE customers for Monoethanolamine (MEA) are industrial manufacturers and licensed distributors, supplied against documented end use.
Amine gas-treating units.
Soaps, amides and cleaners.
Coolants and cutting oils.
Grinding-aid blends.
Verified Dubai and Sharjah traders re-exporting within the rules of each destination.
Synthesis labs needing small lots with full documentation.
Campaign-based production for global brands.
Verified importers in the GCC, Africa and South Asia, subject to import rules.
We supply Monoethanolamine (MEA) to industrial areas, ports and free zones throughout the UAE, with re-export to the wider GCC and beyond.
Fast local delivery to gas-treating, surfactant, metalworking-fluid, detergent and cement manufacturers in Dubai, plus re-export via Jebel Ali Port.
Supply to gas-treating, surfactant, metalworking-fluid, detergent and cement manufacturers in Musaffah, KEZAD and around Khalifa Port.
Serving gas-treating, surfactant, metalworking-fluid, detergent and cement manufacturers across Sharjah's industrial areas and free zones.
Reliable deliveries for Ajman-based gas-treating, surfactant, metalworking-fluid, detergent and cement manufacturers from our UAE stock and import programme.
Supplying gas-treating, surfactant, metalworking-fluid, detergent and cement manufacturers in RAK's free zones and ports.
Road delivery to the east coast with access to Port of Fujairah for regional shipments.
Consolidated with our northern Emirates deliveries for factories and traders.
Export from the UAE on EXW, FOB, CFR, CIF, DAP or DDP terms.
MEA absorbs moisture and carbon dioxide from the air, and it can solidify around 10 °C, so we ship it in sealed, clean drums or bulk containers and plan transport and storage so it stays liquid and pumpable.
Whether you need a few drums for a pilot batch or regular bulk loads for continuous production, we plan packing, labelling, documentation and transport from port or warehouse to your gate.
Sealed HDPE or lined steel drums, typically 200–250 kg.
Bulk containers for regular large-volume supply.
Sealed trial quantities for formulation work.
EXW UAE, FOB Jebel Ali / Khalifa, CFR, CIF, DAP, DDP.
A simple, transparent procurement process built for busy purchase teams.
Send product name, CAS 141-43-5, grade (99% or 85%), colour limit and packing, quantity, packing and delivery Emirate.
We match approved makers and send a quotation with packing, Incoterm and lead time.
COA, SDS and TDS shared upfront, with Monoethanolamine (MEA) samples available for qualification.
We lock in the batch, arrange sealed packing and GHS labelling.
Customs clearance, documentation and transport and transport from port or warehouse.
Delivery to your site in the UAE or GCC, plus repeat-order planning.
Every lot of Monoethanolamine (MEA) we supply is traceable to its manufacturer and production date. We check assay, water content, colour and diethanolamine, triethanolamine and water against your requirement before dispatch so your formulation is not put at risk by off-spec material.
Hazardous. MEA is harmful if swallowed, in contact with skin or inhaled, and causes severe skin burns and eye damage. It is combustible but not highly flammable. Always refer to the supplied SDS for the full classification and transport details.
Strength, colour and impurity limits agreed up front with approved makers.
COA, SDS and TDS with every consignment, plus transport paperwork handled.
Clear quotes with grade, packing, Incoterm and lead time so your purchase team can decide quickly.
COA, SDS, TDS, COO and DG paperwork ready for audits, customs and GCC export.
Delivery of Monoethanolamine (MEA) across the seven Emirates and export to Saudi Arabia, Oman, Qatar, Kuwait and Bahrain.
From sample and trial lots to annual supply contracts and bulk programmes.
Common questions from UAE and GCC buyers about Monoethanolamine (MEA) supply, specifications and delivery.
MEA is used to remove CO₂ and H₂S from gas streams, to make surfactants and soaps, in metalworking fluids, detergents, personal-care products, cement grinding and as an intermediate for agrochemicals and pharmaceuticals.
The CAS number of Monoethanolamine (MEA) is 141-43-5. Its molecular formula is HOCH₂CH₂NH₂ and its molecular weight is 61.08 g/mol.
Monoethanolamine (MEA) (CAS 141-43-5) is also sold as MEA, ethanolamine, 2-aminoethanol, 2-hydroxyethylamine, colamine. Please mention the CAS number in your enquiry so we quote the right material.
Chelora Chemicals UAE is a B2B chemical supplier and distributor of Monoethanolamine (MEA), serving Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with full COA, SDS and TDS documentation and export to the wider GCC.
Yes. We deliver to all seven Emirates, including Jebel Ali and JAFZA in Dubai, KEZAD, Musaffah and Khalifa Port in Abu Dhabi, and SAIF Zone and Hamriyah Free Zone in Sharjah, as well as RAKEZ, Ajman Free Zone and Fujairah.
We supply MEA as a 99% pure liquid and as an 85% aqueous grade, as per COA. Please state the grade, colour limit and your intended end use.
MEA (CAS 141-43-5) has one hydroxyethyl group. It is different from diethanolamine (CAS 111-42-2) and triethanolamine (CAS 102-71-6), from monoisopropanolamine (CAS 78-96-6) and from ethylamine (CAS 75-04-7). Please quote the CAS number.
Share the grade (99% or 85%), colour limit and packing, quantity, packing, Incoterm and delivery Emirate through our contact page and our team aims to respond within one business day.
Typically sealed HDPE or lined steel drums, with IBCs, flexitanks and ISO tanks for larger volumes. Solid or semi-solid grades can be supplied as flakes, in heated form or as a concentrated solution.
The minimum order depends on packing and current stock. We handle everything from a few drums or small packs for trials and lab qualification up to full container loads.
Store in tightly closed, clean containers in a cool, dry, well-ventilated area away from acids and oxidisers. Keep sealed to limit moisture and carbon dioxide uptake, and keep melted grades warm enough to stay pumpable.
MEA is corrosive to skin and eyes and harmful if swallowed, absorbed through the skin or inhaled, and it is transported as a regulated corrosive material. It is combustible but not highly flammable. Use gloves, face protection and ventilation, and follow the SDS.
Yes. We export from the UAE to Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, East and West Africa, South Asia and other markets on EXW, FOB, CFR, CIF, DAP or DDP terms, subject to the import rules of each destination.
Yes. Samples are available for qualification on request, together with the COA and SDS, so your QC or R&D team can approve the material before a commercial order.
In an absorber, aqueous MEA reacts with CO₂ and H₂S to form soluble salts at low temperature. In the regenerator the heat reverses the reaction, releasing the gas and returning lean amine to the loop. Typical solutions are about 15–30% MEA.
Pure MEA freezes at about 10 °C, so bulk tanks and drums in cool storage or air-conditioned warehouses can set solid. The 85% grade and warm storage avoid the problem, and drums can be gently warmed to remelt.
Tell us your grade (99% or 85%), colour limit and packing, quantity, packing and delivery Emirate, and get a quote for Monoethanolamine (MEA) from a trusted chemical supplier in the UAE.