Marhaba · مرحباً
Chemical supply across all 7 Emirates التوريد إلى الإمارات السبع COA, SDS & TDS with every order مستندات كاملة مع كل طلب Jebel Ali · KEZAD · SAIF Zone · Hamriyah · RAKEZ Small lots to full container loads من العينات حتى الحاويات الكاملة

Petrochemicals

Olefins, aromatics, refinery streams, polymers, rubbers, solvents, plasticizers, acids, reagents & inorganics for GCC and global buyers.

Dyes

Diazo components, nitroanilines, nitrobenzenes and chloro/fluoro aromatics for azo dyes, lake pigments and inks.

Amines

Anilines, toluidines, anisidines, phenylenediamines, aliphatic, cyclic, fatty and ethylene amines plus alkanolamines.

    No exact match — we source specialty chemicals on request.

    Ask for this product

    Can’t find your chemical? Sourced on request with COA & SDS, delivered across all 7 Emirates & the GCC.

    Nylon 66 (PA66) Supplier in UAE | CAS 32131-17-2 | Chelora
    Trusted Nylon 66 (PA66) Supplier across all 7 Emirates
    Polyamide / Engineering Thermoplastic

    Nylon 66 (PA66)
    Supplier in Dubai & UAE

    Chelora Chemicals UAE supplies Nylon 66 (PA66) (CAS 32131-17-2) to manufacturers, processors and specialty producers across Dubai, Abu Dhabi, Sharjah and all seven Emirates, with batch-wise COA, sealed packing and fast GCC delivery.

    CAS32131-17-2 Formula(C12H22N2O2)n M.W.226.32 g/mol (repeat unit) PurityResin / engineering grade (per TDS)

    Nylon 66

    (C12H22N2O2)n ✦
    SolidPhysical state
    approx. 255–265 °CMelting point
    226.32Mol. weight
    7Emirates with delivery
    6GCC export markets
    Resin / engineering grade (per TDS)%Assay per COA
    24hQuote response target
    Product Overview

    What is Nylon 66 (PA66)?

    Nylon 66 (PA66) is an engineering thermoplastic polyamide produced by the polycondensation of hexamethylenediamine and adipic acid. It is supplied as resin pellets or chips and valued for its high strength, heat resistance, wear resistance and dimensional stability.

    Typical uses are as a resin for engineering plastics and automotive components, textile and industrial fibers, electrical and electronic connectors, and film and packaging applications.

    As an established chemical supplier in the UAE, Chelora Chemicals sources Nylon 66 (PA66) from approved manufacturers with consistent quality and controlled specification, and delivers it to customers in Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, as well as export customers in Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, Africa and South Asia.

    • Resin / engineering grade (per TDS), with higher grades available on request
    • COA, SDS and TDS shared before dispatch
    • Packaging suited to the product's physical form and handling class
    • Trial lots to full container loads
    • Supply via Jebel Ali, Khalifa Port, Hamriyah and Sharjah
    Technical Data

    Nylon 66 (PA66) specifications & properties

    Typical specification and physical data for Nylon 66 (PA66) supplied in the UAE. Batch-specific values are always confirmed on the Certificate of Analysis issued with each lot.

    Typical Specification

    ParameterSpecification
    AppearanceSolid (chips / granules / resin pellets)
    Assay / PurityResin / engineering grade (per TDS)
    IdentificationConforms to structure
    Moisture / VolatilesAs per COA / customer requirement
    ImpuritiesAs per COA
    GradeIndustrial / technical grade
    PackingSee Packaging & Logistics section
    DocumentsCOA, SDS, TDS, COO

    Physical & Chemical Properties

    PropertyValue
    Chemical nameNylon 66 (PA66)
    CAS number32131-17-2
    Molecular formula(C12H22N2O2)n
    Molecular weight226.32 g/mol (repeat unit)
    Physical state (20 °C)Solid (chips / granules / resin pellets)
    Melting pointapprox. 255–265 °C
    Boiling pointDecomposes before boiling; not applicable
    SensitivityStable under normal storage; keep away from heat, ignition sources and incompatible materials

    Values are typical literature data for reference only and do not form a sales specification. Contact us for the latest TDS and batch COA.

    Need a specific purity, impurity limit or moisture value? We match your spec to approved makers.

    Share Your Specification →
    Applications

    Where Nylon 66 (PA66) is used

    From polymer and resin producers to specialty manufacturers, Nylon 66 (PA66) is a versatile building block for UAE and GCC industry.

    Automotive Engineering Parts

    Under-the-hood components, connectors and structural parts needing heat and wear resistance.

    Textile & Industrial Fibers

    High-tenacity yarns for carpets, tyre cord, ropes and technical textiles.

    Electrical & Electronics

    Connectors, housings and insulating parts for E&E manufacturers.

    Films & Packaging

    Barrier films and specialty packaging requiring strength and clarity.

    Compounding & Masterbatching

    Base resin for glass-filled and modified engineering compounds.

    3D Printing & Specialty Resins

    Filament and powder feedstock for additive manufacturing.

    Industries We Serve

    Supplying Nylon 66 (PA66) to UAE & GCC industry

    Our UAE customers for Nylon 66 (PA66) range from free zone manufacturers to regional traders re-exporting through Jebel Ali.

    01

    Agrochemical & Industrial Manufacturers

    Producers using Nylon 66 as a core raw material or process intermediate.

    02

    Pharma & Fine Chemical Units

    Manufacturers of specialty intermediates relying on Nylon 66 in their process chain.

    03

    Polymer & Resin Producers

    PET, polyamide and polyester plants consuming Nylon 66 as feedstock.

    04

    Specialty Chemical Makers

    Producers of derivative and downstream chemistry built on Nylon 66.

    05

    Chemical Traders & Distributors

    Dubai and Sharjah traders re-exporting Nylon 66 to the GCC, Africa and South Asia.

    06

    Toll & Contract Manufacturers

    Contract synthesis and compounding plants running campaign-based production.

    07

    Research Laboratories

    Universities, QC labs and R&D centres needing smaller quantities with full documentation.

    08

    Export Buyers

    Importers in Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, Africa and CIS buying via UAE.

    UAE Coverage

    Nylon 66 (PA66) delivered across all seven Emirates

    We supply Nylon 66 (PA66) to industrial areas, ports and free zones throughout the UAE, with re-export to the wider GCC and beyond.

    دبي

    Nylon 66 Supplier in Dubai

    Fast local delivery and re-export via Jebel Ali Port for traders and manufacturers.

    Jebel Ali PortJAFZADubai Investments ParkAl QuozDubai Industrial CityRas Al Khor
    أبوظبي

    Nylon 66 Supplier in Abu Dhabi

    Supply to chemical and industrial units in Musaffah, KEZAD and Khalifa Port.

    Khalifa PortKEZADMusaffah / ICADAl AinRuwais
    الشارقة

    Nylon 66 Supplier in Sharjah

    Serving industrial, polymer and chemical blending units across Sharjah's industrial areas and free zones.

    SAIF ZoneHamriyah Free ZoneSharjah Industrial AreasPort Khalid
    عجمان

    Nylon 66 Supplier in Ajman

    Reliable deliveries for Ajman manufacturers from our UAE stock and import programme.

    Ajman Free ZoneNew Industrial AreaAjman Port
    رأس الخيمة

    Nylon 66 Supplier in Ras Al Khaimah

    Supplying pharma, chemical and industrial producers in RAK's free zones and ports.

    RAKEZSaqr PortAl Hamra Industrial Zone
    الفجيرة

    Nylon 66 Supplier in Fujairah

    Road delivery to the east coast with access to Port of Fujairah for regional shipments.

    Port of FujairahFujairah Free ZoneDibba
    أم القيوين

    Nylon 66 Supplier in Umm Al Quwain

    Consolidated with our northern Emirates deliveries for factories and traders.

    UAQ Free Trade ZoneUAQ Industrial Area
    الخليج

    GCC & International Export

    Export from the UAE on EXW, FOB, CFR, CIF, DAP or DDP terms.

    Saudi ArabiaOmanQatarKuwaitBahrainAfricaSouth Asia
    Packaging & Logistics

    Packed to protect quality and consistency

    Because Nylon 66 is moisture-sensitive and must stay dry before moulding or spinning, we ship it in sealed, moisture-barrier packaging suited to UAE humidity and long sea and road transit.

    Whether you need a few units for a pilot campaign or regular bulk loads for continuous production, we plan packing, labelling, dangerous-goods paperwork and transport from port or warehouse to your gate.

    Multi-Wall Bags

    25 kg moisture-barrier bags, heat-sealed for resin pellets.

    Small Packs

    25 kg packs for trial moulding and lab-scale evaluation.

    Bulk / Octabins

    500–1,000 kg octabins and bulk bags for continuous moulding lines.

    Incoterms

    EXW UAE, FOB Jebel Ali / Khalifa, CFR, CIF, DAP, DDP.

    How to Buy

    Buying Nylon 66 (PA66) in the UAE, step by step

    A simple, transparent procurement process built for busy purchase teams.

    Share Your Requirement

    Send product name, CAS 32131-17-2, purity, quantity, packing and delivery Emirate.

    Specs & Quotation

    We match approved makers and send an offer with price, packing, Incoterm and lead time.

    Samples & Documents

    COA, SDS and TDS shared upfront, with samples available for qualification.

    Order Confirmation

    We lock in the batch, arrange sealed packing and GHS labelling.

    Customs & Logistics

    Customs clearance, DG handling and transport from port or warehouse.

    Delivery & Support

    Delivery to your site in the UAE or GCC, plus repeat-order planning.

    Quality & Compliance

    Documented quality on every batch

    Every lot of Nylon 66 (PA66) we supply is traceable to its manufacturer and production date. We check the specification against your requirement before dispatch so your process or formulation is not put at risk by off-spec material.

    COACertificate of Analysis per batch
    SDSGHS Safety Data Sheet
    TDSTechnical Data Sheet
    COOCertificate of Origin
    GHSHazard labelling & DG docs
    LotFull batch traceability
    Safe Handling

    Storage & handling guidance

    Handle per GHS classification. Nylon 66 resin is generally considered low-hazard in solid pelletised form, but molten resin, dust from grinding and processing fumes require precautions. It should be handled per standard engineering-plastics practice, away from open flame during processing. Always refer to the supplied SDS for the full GHS classification.

    • Store in a cool, dry, well-ventilated area, away from direct sun and heat.
    • Keep containers tightly closed and protected from contamination.
    • Keep away from incompatible materials and sources of ignition as per SDS.
    • Wear chemical-resistant gloves, goggles and protective clothing when handling.
    • Use local exhaust ventilation; avoid breathing vapours, dust or mist.
    • Handle spills with inert absorbent and dispose of as per UAE regulations.
    Why Chelora

    Why UAE buyers source Nylon 66 (PA66) from us

    01

    Approved Manufacturers

    Long-term relationships with established makers keep purity, consistency and impurity profile stable batch after batch.

    02

    Fast, Clear Quotations

    Offers with price, grade, packing, Incoterm and lead time so your purchase team can decide quickly.

    03

    Application Know-How

    We understand the specifications that polymer, resin and specialty chemical producers actually need from Nylon 66 (PA66).

    04

    Full Documentation

    COA, SDS, TDS, COO and DG paperwork ready for audits, customs and GCC export.

    05

    UAE & GCC Logistics

    Delivery across the seven Emirates and export to Saudi Arabia, Oman, Qatar, Kuwait and Bahrain.

    06

    Flexible Volumes

    From sample and trial lots to annual supply contracts and bulk programmes.

    FAQ

    Nylon 66 (PA66) questions answered

    Common questions from UAE and GCC buyers about Nylon 66 (PA66) supply, specifications and delivery.

    Nylon 66 is used as an engineering resin for automotive parts, electrical and electronic connectors, industrial and textile fibers, films and compounded plastics. Typical uses are automotive components, high-tenacity yarns, E&E housings and specialty film applications.

    The CAS number of Nylon 66 (PA66) is 32131-17-2. Its repeat unit formula is C12H22N2O2 with a repeat-unit molecular weight of approximately 226.32 g/mol.

    Nylon 66 (CAS 32131-17-2) is also referred to as PA66, Polyamide 66, Poly(hexamethylene adipamide) and Nylon 6,6. Please mention the grade and CAS number in your enquiry so we quote the right material.

    Chelora Chemicals UAE is a B2B supplier and distributor of Nylon 66 (PA66) resin, serving Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with full COA, SDS and TDS documentation and export to the wider GCC.

    Yes. We deliver to all seven Emirates, including Jebel Ali and JAFZA in Dubai, KEZAD, Musaffah and Khalifa Port in Abu Dhabi, and SAIF Zone and Hamriyah Free Zone in Sharjah, as well as RAKEZ, Ajman Free Zone and Fujairah.

    We source standard and glass-filled engineering grades to match moulding, extrusion or fiber-spinning requirements. Specific melt-flow, filler content or additive packages can be sourced on request.

    Nylon 66 is made from hexamethylenediamine and adipic acid, while Nylon 6 is made by ring-opening polymerisation of caprolactam. Nylon 66 generally offers a higher melting point and stiffness, while Nylon 6 can offer easier processing for some applications.

    Pricing depends on grade, filler content, quantity, packing, Incoterm and current market conditions. Share your requirement through our contact page and our team aims to send a clear quotation within one business day.

    It is typically supplied in 25 kg moisture-barrier multi-wall bags, with octabins and bulk bags available for continuous production lines. Packaging is heat-sealed to protect the resin from moisture pickup.

    The minimum order depends on grade and availability. We handle everything from small packs for trial moulding and qualification up to full container loads.

    Store sealed bags in a cool, dry, well-ventilated warehouse away from direct sunlight and moisture. Once opened, dry the resin before processing as per the TDS to avoid hydrolysis during moulding or spinning.

    Yes. We export from the UAE to Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, East and West Africa, South Asia and other markets on EXW, FOB, CFR, CIF, DAP or DDP terms, subject to the import rules of each destination.

    Let's Talk Chemistry

    Need Nylon 66 (PA66) in Dubai, Abu Dhabi or Sharjah?

    Tell us your purity, quantity, packing and delivery Emirate, and get a competitive quote for Nylon 66 (PA66) from a trusted chemical supplier in the UAE.

    Nylon 66 (PA66) supplier UAENylon 66 (PA66) DubaiCAS 32131-17-2Nylon 66 (PA66) Abu DhabiNylon 66 (PA66) SharjahNylon 66 supplier UAENylon 66 DubaiNylon 66 supplier GCCNylon 66 Abu DhabiNylon 66 (PA66) AjmanNylon 66 (PA66) Ras Al KhaimahNylon 66 (PA66) Fujairahbuy Nylon 66 (PA66) UAEbulk Nylon 66 (PA66) GCCNylon 66 (PA66) exporter UAENylon 66 (PA66) distributor DubaiNylon 66 supplier Jebel Ali